Now showing items 4561-4580 of 10765

    • Nonlinear Finite-Element Analysis for Hysteretic Behavior of Thin-Walled Circular Steel Columns with In-Filled Concrete 

      Yoshiaki Goto; Ghosh Prosenjit Kumar; Naoki Kawanishi (American Society of Civil Engineers, 2010)
      The strength and ductility of thin-walled steel columns under cyclic loads are considerably upgraded by filling concrete into hollow spaces surrounded by steel tube and diaphragms. The above thin-walled steel columns filled ...
    • Torsional Strength of RC Beams Considering Tension Stiffening Effect 

      Jung-Yoon Lee; Sang-Woo Kim (American Society of Civil Engineers, 2010)
      Stress-strain relationship for a steel bar embedded in concrete differs somewhat to that of a bare steel bar because the surrounding concrete is bonded to the bar. This behavior is known as tension stiffening. This paper ...
    • In-Plane Experimental Testing of Timber-Concrete Composite Floor Diaphragms 

      Michael P. Newcombe; Wouter A. van Beerschoten; David Carradine; Stefano Pampanin; Andrew H. Buchanan (American Society of Civil Engineers, 2010)
      Recent advances in multistory timber building design have led to new structural systems that allow open floor plans with large spans between frames and/or walls. Timber-concrete composite (TCC) flooring can achieve the ...
    • Engineered Bamboo I-Joists 

      Mark Aschheim; Luisa María Gil-Martín; Enrique Hernández-Montes (American Society of Civil Engineers, 2010)
      Many bamboo species are well regarded for their strength and rapid renewability, although the nonuniformity of bamboo poles has impeded use in developed countries. Described herein are the results of a pilot effort to ...
    • Probabilistic Push-Over Analysis of Structural and Soil-Structure Systems 

      M. Barbato; Q. Gu; J. P. Conte (American Society of Civil Engineers, 2010)
      In this paper, the mean-centered first-order second-moment (FOSM) method is employed to perform probabilistic push-over analysis (POA) of structural and/or soil-structure systems. Approximations of first and second statistical ...
    • Composite Flexural Behavior of Full-Scale Concrete-Filled Tubes without Axial Loads 

      Aaron D. Probst; Thomas H.-K. Kang; Chris Ramseyer; Uksun Kim (American Society of Civil Engineers, 2010)
      Most prior experimental research on the composite behavior of concrete-filled tubes (CFTs) in flexure has been performed using minimodels. The conclusions that have been reached based on the prior research stipulate that ...
    • Geometrically Nonlinear Analysis of Plane Frames Subjected to Temperature Changes 

      Aslam Kassimali; Juan J. Garcilazo (American Society of Civil Engineers, 2010)
      Procedure for large displacement and stability analysis of elastic plane frames subjected to temperature changes is presented. The method of analysis is based on an Eulerian (corotational) formulation, which was developed ...
    • Estimation of Shear Strength of Structural Shear Walls 

      Wael Kassem; Ahmed Elsheikh (American Society of Civil Engineers, 2010)
      An analysis method for predicting the shear strength and behavior of structural shear walls under both monotonic and cyclic loading is presented in this paper. The proposed analysis method is based on the softened truss ...
    • New Yield Model for Wood Dowel Connections 

      Joseph F. Miller; Richard J. Schmidt; William M. Bulleit (American Society of Civil Engineers, 2010)
      The current National Design Specification (NDS) for Wood Construction design methods for dowel-type connectors are based on four-yield modes for connections in double shear. These yield modes were formulated for use with ...
    • Behavior of Cold Bend Pipes under Bending Loads 

      M. Sen; J. J. R. Cheng; J. Zhou (American Society of Civil Engineers, 2011)
      Ground movement along a buried pipeline often places the line in net compression. The local buckling resistance at cold bends is less than at straight sections, and hence, local buckling tends to occur at bends. Correspondingly, ...
    • Plastic Behavior of Shear Tabs Welded to Flexible Wall Support 

      Yanglin Gong (American Society of Civil Engineers, 2010)
      This paper presents an experimental study of six steel shear tab connections to hollow structural section columns. This study focuses on the plastic behavior of shear tabs and their supporting column walls. The column walls ...
    • Fatigue Testing of Stiffened Traffic Signal Structures 

      Jay A. Puckett; Robert G. Erikson; John P. Peiffer (American Society of Civil Engineers, 2010)
      Based on in-service inspection of poles with traditional designs, the inventory of Wyoming Department of Transportation (WYDOT) exhibited approximately a one-third cracking rate. A ring-stiffened connection is presently ...
    • Glued Composite Timber-Concrete Beams. I: Interlayer Connection Specimen Tests 

      João Henrique Jorge de Oliveira Negrão; Catarina Alexandra Leitão de Oliveira; Francisco Miguel Maia de Oliveira; Paulo Barreto Cachim (American Society of Civil Engineers, 2010)
      The composite interaction in timber-concrete beams is usually achieved with mechanical devices, such as shear connectors or plates driven into the materials. However, this connecting system shows some inherent inconveniences, ...
    • Modeling Spatially Unrestricted Pedestrian Traffic on Footbridges 

      Stana Živanović; Aleksandar Pavić; Einar Thór Ingólfsson (American Society of Civil Engineers, 2010)
      The research into modeling walking-induced dynamic loading and its effects on footbridge structures and people using them has been intensified in the past decade after some high profile vibration serviceability failures. ...
    • Response Spectral Matching of Two Horizontal Ground-Motion Components 

      Damian N. Grant (American Society of Civil Engineers, 2011)
      Accurate performance-based earthquake engineering analysis requires that engineering seismologists and structural analysts employ consistent characterizations of bidirectional seismic demand. In current design, the seismic ...
    • Experimental Seismic Response of a Full-Scale Six-Story Light-Frame Wood Building 

      John W. van de Lindt; Shiling Pei; Steven E. Pryor; H. Shimizu; H. Isoda (American Society of Civil Engineers, 2010)
      In July 2009, a full-scale midrise light-frame wood apartment building was subjected to a series of earthquakes at the world’s largest shake table in Miki, Japan. This article focuses on the test results of that full-scale ...
    • Variation of Internal Pressure with Varying Sizes of Dominant Openings and Volumes 

      J. D. Ginger; J. D. Holmes; P. Y. Kim (American Society of Civil Engineers, 2010)
      A dominant opening in a windward wall will generate large positive internal pressures during windstorms, which, in combination with large suction pressures on the roof, commonly causes building failures and is hence a ...
    • Seismic Response and Fragility of Deteriorated Reinforced Concrete Bridges 

      Jessica Simon; Joseph M. Bracci; Paolo Gardoni (American Society of Civil Engineers, 2010)
      One of the greatest challenges in the United States today is overcoming the deterioration of an aging infrastructure system. In particular, the highway/bridge infrastructure system has traditionally been neglected of ...
    • Shear Strength and Drift Capacity of Fiber-Reinforced Concrete Slab-Column Connections Subjected to Biaxial Displacements 

      Min-Yuan Cheng; Gustavo J. Parra-Montesinos; Carol K. Shield (American Society of Civil Engineers, 2010)
      Results from the tests of three large-scale slab-column subassemblies subjected to combined gravity load and biaxial lateral displacements are presented. The main purpose of the experimental program was to investigate the ...