Journal of Structural Engineering: Recent submissions
Now showing items 4541-4560 of 10765
-
Timber-Limecrete Composite Floors Using Timber Connectors Sloped toward or against Slip
(American Society of Civil Engineers, 2010)Building floors comprising timber joists connected to limecrete (lime concrete) slabs via timber headed studs have low carbon footprints. Such floors are not yet used owing to lack of underpinning research. This paper ... -
Analysis of Frequency Nonstationarity via Continuous Wavelet Transform in the Response of Primary-Secondary Systems
(American Society of Civil Engineers, 2010)An investigation into the frequency nonstationarity in the response of primary-secondary (P-S) systems and the impact it could have in the analysis of such structures has been presented in this note. For this purpose, a ... -
Characteristics of Rectangular, Flanged, and End-Confined Reinforced Concrete Masonry Shear Walls for Seismic Design
(American Society of Civil Engineers, 2010)This paper contains detailed analyses of an experimental study conducted to evaluate the ductility, stiffness degradation and energy dissipation characteristics of rectangular, flanged, and end-confined reinforced masonry ... -
Ground-Motion Suite Selection for Eastern North America
(American Society of Civil Engineers, 2011)Ground-motion suite selection for Eastern North America (ENA) is distinguished from suite selection for high seismic regions by uncertainty related to earthquake intensity, spectral shape, and the wide range of relevant ... -
Capacity Reduction and Fire Load Factors for Design of Steel Members Exposed to Fire
(American Society of Civil Engineers, 2010)A general reliability-based methodology is proposed for developing capacity reduction and fire load factors for design of steel members exposed to fire. The effect of active fire protection systems (e.g., sprinklers, smoke ... -
Fully Coupled 10-Degree-of-Freedom Beam Theory for Piecewise Straight Thin-Walled Beams with General Quadrilateral Cross Sections
(American Society of Civil Engineers, 2010)A fully coupled 10-degree-of-freedom (DOF) beam theory is developed for the analysis of thin-walled closed piecewise straight beams of general quadrilateral cross sections. The developed beam theory can predict the structural ... -
Monitoring-Based Fatigue Reliability Assessment of Steel Bridges: Analytical Model and Application
(American Society of Civil Engineers, 2010)A fatigue reliability model which integrates the probability distribution of hot spot stress range with a continuous probabilistic formulation of Miner’s damage cumulative rule is developed for fatigue life and reliability ... -
Closure to “Quantitative Comparison of Optimization Approaches for the Design of Supplemental Damping in Earthquake Engineering Practice” by Robert Levy and Oren Lavan
(American Society of Civil Engineers, 2010) -
Hysteresis Model of Thin Infill Plate for Cyclic Nonlinear Analysis of Steel Plate Shear Walls
(American Society of Civil Engineers, 2010)A hysteresis model for thin infill steel plates was developed to evaluate the nonlinear cyclic behavior of steel plate shear walls. Nonlinear finite-element analysis was performed for thin steel plates with a rigid boundary ... -
Stability Analysis of Bay Bridge Saddle Configuration
(American Society of Civil Engineers, 2010)In this brief note, we present the results of a full finite deformation analysis of a system similar to the Oakland-San Francisco Bay Bridge saddle repair system. The dimensions used are for illustration purposes but are ... -
Comparative Analysis on the Seismic Behavior of Combined RC-Masonry Buildings
(American Society of Civil Engineers, 2010)Since the early 20th century combined RC-masonry buildings have become more common in European, Mediterranean, and Southern America countries. Despite the diffusion of this combined building typology, the international ... -
Analysis of Tall Buildings with Damped Outriggers
(American Society of Civil Engineers, 2010)A novel damped outrigger system has been recently proposed for tall buildings, and is quite promising. To gain insight into the conceptual design of such systems, a simple beam-damper system model for a building with such ... -
Optimizing Structures Subject to Multiple Deflection Constraints and Load Cases Using the Principle of Virtual Work
(American Society of Civil Engineers, 2010)This paper presents an iterative automated method for optimizing structures with multiple deflection criteria and load cases. The method is based on the principle of virtual work. Discrete sections are selected for structures ... -
Effects of a Construction Tower Crane on the Wind Loading of a High-Rise Building
(American Society of Civil Engineers, 2010)High-rise construction projects commonly use a tower crane attached to the building by braced connections along its height. The presence of the tower crane modifies the aerodynamic cross section of the building and can ... -
Mitigating Epistemic Uncertainty in Structural Identification: Case Study for a Long-Span Steel Arch Bridge
(American Society of Civil Engineers, 2011)Characterization of constructed civil-engineering systems through structural identification (St-Id) has gained increasing attention in recent years due to its potential to enable more effective infrastructure asset management ... -
Modified Elastofiber Element for Steel Slender Column and Brace Modeling
(American Society of Civil Engineers, 2010)An efficient beam element, the modified elastofiber (MEF) element, has been developed to capture the overall features of the elastic and inelastic responses of slender columns and braces under axial cyclic loading without ... -
In-Plane Behavior of Clay Masonry Walls: Experimental Testing and Finite-Element Modeling
(American Society of Civil Engineers, 2010)Extensive experimental research aimed at defining the in-plane cyclic behavior of three types of load-bearing masonry walls, assembled with perforated clay units, and various types of head and bed joints was carried out. ... -
Shear Strength of Steel Fiber-Reinforced Ultrahigh- Performance Concrete Beams without Stirrups
(American Society of Civil Engineers, 2010)While the database of tests on shear in reinforced concrete members without stirrups is extensive, the pool of test data for fiber-reinforced specimens is limited. Fewer still are tests undertaken on high-performance ... -
Progressive Collapse Resistance of Steel-Concrete Composite Floors
(American Society of Civil Engineers, 2010)This paper discusses the progressive collapse resistance of steel-concrete composite floors in which steel beams are attached to columns through shear tabs. This is a common type of system used for the gravity bay portions ... -
Multimodel Structural Performance Monitoring
(American Society of Civil Engineers, 2010)Measurements from load tests may lead to numerical models that better reflect structural behavior. This kind of system identification is not straightforward due to important uncertainties in measurement and models. Moreover, ...