Now showing items 4581-4600 of 10765

    • Behavior of Prestressed Steel Beams 

      B. Belletti; A. Gasperi (American Society of Civil Engineers, 2010)
      This paper reports on the behavior of simply supported (I-shaped cross section) steel beams prestressed by tendons. It is well known that this typology of beams has successfully been used mainly in the past. Prestressed ...
    • Selection of Natural and Synthetic Accelerograms for Seismic Vulnerability Studies on Reinforced Concrete Frames 

      Angelo Masi; Marco Vona; Marco Mucciarelli (American Society of Civil Engineers, 2011)
      The choice of seismic input utilized in the evaluation of structural response is determined by the scope of the analysis, namely, the design of new buildings or damage scenarios on existing buildings. Further, a decision ...
    • Multicriteria Capacity Envelopes for Biaxial Bending of Concrete Hydraulic Structures 

      Lucian Stefan; Pierre Léger (American Society of Civil Engineers, 2010)
      Envelopes for biaxial bending capacity of reinforced concrete elements are used extensively in design or in structural safety evaluation to verify the adequacy of internal force resultants from series of axial
    • Experimental Evaluation of Posttensioned Precast Concrete Coupling Beams 

      Brad D. Weldon; Yahya C. Kurama (American Society of Civil Engineers, 2010)
      This paper describes the results from eight half-scale experiments of unbonded posttensioned precast concrete coupling beams under reversed-cyclic lateral loading. Each test specimen includes a coupling beam and the adjacent ...
    • Conditional Mean Spectrum: Tool for Ground-Motion Selection 

      Jack W. Baker (American Society of Civil Engineers, 2011)
      A common goal of dynamic structural analysis is to predict the response of a structure subjected to ground motions having a specified spectral acceleration at a given period. This is important, for example, when coupling ...
    • Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial Compression 

      P. Paultre; R. Eid; Y. Langlois; Y. Lévesque (American Society of Civil Engineers, 2010)
      This paper presents tests that were performed on square large-scale steel-fiber-reinforced high-strength concrete (HSC) columns under concentric compression loading. The experimental program was mainly designed to examine ...
    • In-Plane Behavior of Partially Grouted Reinforced Concrete Masonry Shear Walls 

      E. Minaie; M. Mota; F. L. Moon; A. A. Hamid (American Society of Civil Engineers, 2010)
      The objectives of this research were to experimentally establish the in-plane behavior of partially grouted (PG) reinforced concrete masonry shear walls and to assess the appropriateness of current seismic design provisions ...
    • Seismic Design Strength of Cold-Formed Steel-Framed Shear Walls 

      Reynaud Serrette (American Society of Civil Engineers, 2010)
      A method for estimating the available strength level (load and resistance factor design) seismic resistance of light-frame cold-formed steel shear walls is discussed. The proposed method attempts to account for the early ...
    • Fragility Assessment of Reduced Beam Section Moment Connections 

      Dimitrios G. Lignos; Dimitrios Kolios; Eduardo Miranda (American Society of Civil Engineers, 2010)
      This paper presents fragility functions to estimate the probability of reaching or exceeding different damage states in reduced beam section (RBS) beam-to-column moment connections of steel moment resisting frames. The ...
    • Integrated Reliability-Based Seismic Drift Design Optimization of Base-Isolated Concrete Buildings 

      Xiao-Kang Zou; Qian Wang; Gang Li; Chun-Man Chan (American Society of Civil Engineers, 2010)
      This paper presents an effective numerical reliability-based optimization technique for the design of base-isolated concrete building structures under spectrum loading. Attempts have been made to automate the integrated ...
    • Earthquake Accelerogram Selection and Scaling Procedures for Estimating the Distribution of Drift Response 

      Nicola Buratti; Peter J. Stafford; Julian J. Bommer (American Society of Civil Engineers, 2011)
      The problem of selecting a suite of earthquake accelerograms for time-domain analyses is of particular practical and academic interest. Research in this field has led to numerous approaches for compiling suites of accelerograms ...
    • Wind-Induced Pressures on Patio Covers 

      Ioannis Zisis; Ted Stathopoulos (American Society of Civil Engineers, 2010)
      A wind tunnel study has been carried out to assess wind loads on patio covers attached to low-rise buildings. A 1:100 geometric scale building and patio cover model was constructed and tested for open exposure conditions. ...
    • Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites 

      Naiyu Wang; Bruce R. Ellingwood; Abdul-Hamid Zureick (American Society of Civil Engineers, 2010)
      Structural applications of carbon fiber-reinforced polymer (FRP) composites in civil infrastructure rehabilitation projects are receiving increasing interest due primarily to their high strength-weight ratio, resistance ...
    • Cyclic Testing and Modeling of Cold-Formed Steel Special Bolted Moment Frame Connections 

      Chia-Ming Uang; Atsushi Sato; Jong-Kook Hong; Ken Wood (American Society of Civil Engineers, 2010)
      A cyclic testing of nine full-scale beam-to-column moment connection subassemblies was carried out to support the development of design provisions for a lateral load-resisting system in the AISI S110:
    • Wind Tunnel Studies on Sawtooth and Monosloped Roofs 

      David O. Prevatt; Bo Cui (American Society of Civil Engineers, 2010)
      Wind tunnel studies were conducted on 1:100 scale building models of monosloped and several (two- through five-span) sawtooth roof buildings to determine appropriate peak and area-averaged wind pressure coefficients. The ...
    • Shear Characteristics and Design for High-Strength Self-Consolidating Concrete 

      Young Hoon Kim; Mary Beth D. Hueste; David Trejo; Daren B. H. Cline (American Society of Civil Engineers, 2010)
      To achieve adequate flow and homogeneous concrete for precast, prestressed members, self-consolidating concrete (SCC) typically has higher paste and lower coarse aggregate volumes than conventional concrete (CC). The lower ...
    • Elongation of Reinforced Concrete Members Subjected to Cyclic Loading 

      Tae-Sung Eom; Hong-Gun Park (American Society of Civil Engineers, 2010)
      Longitudinal elongation develops in reinforced concrete members that exhibit flexural yielding during cyclic loading. The longitudinal elongation can decrease the shear strength and deformation capacity of the members. In ...
    • Structural System Parameter Selection Based on Collapse Potential of Buildings in Earthquakes 

      Farzin Zareian; Helmut Krawinkler (American Society of Civil Engineers, 2010)
      This paper attempts to provide insight into the sensitivity of the collapse capacity of moment-resisting frame and shear wall structures to variation in basic structural parameters, and the choice of an appropriate ground ...
    • Cyclic Behavior of Diagrid Nodes with H -Section Braces 

      Young-Ju Kim; In-Yong Jung; Young-Kyu Ju; Soon-Jeon Park; Sang-Dae Kim (American Society of Civil Engineers, 2010)
      In recent years, the number of tall buildings being constructed has been rapidly increasing worldwide. Some buildings have been constructed with triangular exterior structural members, known as diagrid systems, which have ...
    • Experimental Study on Multicantilever Prestressed Composite Beams with Corrugated Steel Webs 

      Xudong Shao; Haolei Wang; Hua Zhao; Ying Chang (American Society of Civil Engineers, 2010)
      An experimental study was carried out to investigate the behavior of a new type multicantilever prestressed composite beams with corrugated steel webs (CBCW). The main mechanical performances of CBCW, such as efficiency ...