Journal of Structural Engineering: Recent submissions
Now showing items 4201-4220 of 10765
-
Model-Based Feedforward-Feedback Actuator Control for Real-Time Hybrid Simulation
(American Society of Civil Engineers, 2013)Substructure hybrid simulation is a powerful, cost-effective alternative for testing structural systems, closely coupling numerical simulation and experimental testing to obtain the complete response of a structure. In ... -
Evaluation of Fatigue Bond Strength of Anchorage Zones with a Mechanical Model
(American Society of Civil Engineers, 2013)The paper describes a numerical model to analyze the fatigue behavior of RC anchorage zones. The model takes into account the cycle-dependent bond-slip behavior at the steel-concrete interface and is able to reproduce the ... -
Structural Identification for Performance Prediction Considering Uncertainties: Case Study of a Movable Bridge
(American Society of Civil Engineers, 2013)Structural identification (St-Id) can be described simply as estimating the properties of a structural system based on a correlation of inputs and outputs for decision making. For a complete St-Id process, establishing the ... -
Torsional Responses under Bidirectional Seismic Excitations: Effect of Instantaneous Load Eccentricities
(American Society of Civil Engineers, 2013)Torsional response for one-way or two-way asymmetric linear/nonlinear structural systems under uni- and bidirectional seismic excitations increases the maximum displacement demand on structural systems. In this study, we ... -
Dynamic Response of Composite Beams with Partial Shear Interaction Using a Higher-Order Beam Theory
(American Society of Civil Engineers, 2013)Dynamic response of composite beams with partial interaction is presented using a one-dimensional finite-element model based on a higher-order beam theory. The proposed model takes into account the effect of partial shear ... -
Proposal to Account for Concrete Shrinkage and Environmental Strains in Design of Timber-Concrete Composite Beams
(American Society of Civil Engineers, 2013)Timber-concrete composite beams are statically indeterminate structures where a concrete topping is connected via shear connectors to a timber beam. Because effects such as drying shrinkage of concrete, variations of timber ... -
Empirical Model of the Moment-Rotation Curve of Beam-to-Beam Bolted Flush Endplate Connections
(American Society of Civil Engineers, 2013)Based on the current knowledge of steel moment connections, an empirical predictive three-parameter exponential model to depict the moment-rotation ( -
Dynamic Testing of Single- and Double-Story Steel-Sheathed Cold-Formed Steel-Framed Shear Walls
(American Society of Civil Engineers, 2013)This paper describes an experimental investigation of steel-sheathed cold-formed steel-framed shear walls by means of dynamic shake table tests. The objective was to evaluate the seismic performance and to identify whether ... -
Response Spectral Characteristics and Reliabilities of Linear Structures to Both Intensity and Frequency Content Time-Varying Earthquake Loads
(American Society of Civil Engineers, 2012)A numerical method for estimating the useful spectral characteristics of responses of classically damped linear elastic structures to the Yeh-Wen model of fully nonstationary random earthquake loads is developed. The ... -
Corotational Model for Cyclic Analysis of Light-Frame Wood Shear Walls and Diaphragms
(American Society of Civil Engineers, 2013)This paper presents a new two-dimensional shear-wall and diaphragm model developed as part of a Network for Earthquake Engineering Simulation (NEES) Project entitled NEES-Soft: Seismic Risk Reduction for Soft-Story Woodframe ... -
Precast Concrete Diaphragm Connector Performance Database
(American Society of Civil Engineers, 2013)A variety of connector details are used to provide integrity and force transfer between precast concrete panels in building floor diaphragms. To assess the adequacy of these connectors a large number of experiments have ... -
Structural Behavior of Corroded Steel Pipes Subject to Axial Compression and Internal Pressure: Experimental Study
(American Society of Civil Engineers, 2013)External corrosion is found in many onshore oil and gas pipelines, and corrosion is a major cause of structural failure of these pipelines. Onshore buried pipelines can be subjected to axial, bending, shear, and other ... -
Objective Load Rating of a Steel-Girder Bridge Using Structural Modeling and Health Monitoring
(American Society of Civil Engineers, 2013)The future of highway infrastructure in the United States is at a critical junction. Nearly one-third of U.S. bridges are nearing the end of their design life, and one in ten bridges is categorized as structurally deficient. ... -
Experimental Studies on Deep Trapezoidal Sheeting with Perforated Webs
(American Society of Civil Engineers, 2013)In this paper, the behavior of deep trapezoidal sheeting with perforated webs is studied. The analyzed panel has longitudinal stiffeners both in the webs and flanges, which improves the load-bearing capacity but makes the ... -
Vulnerability and Risk Assessment of Single-Layer Reticulated Domes Subjected to Earthquakes
(American Society of Civil Engineers, 2012)In order to provide a good understanding of the damage states of single-layer reticulated domes under earthquake loading, a number of increment dynamic analyses are carried out on domes with different spans, rise-span ... -
Influence of Slenderness on High-Strength Rectangular Concrete-Filled Tubular Columns with Axial Load and Nonconstant Bending Moment
(American Society of Civil Engineers, 2012)Forty-nine experimental tests were conducted on rectangular and square tubular columns filled with high-strength concrete ( -
Experimental Investigation of Nonductile RC Corner Beam-Column Joints with Floor Slabs
(American Society of Civil Engineers, 2013)The paper presents the experimental investigation of full-scale RC corner beam-column joints without transverse reinforcement in the joint region leading to nonductile behavior in many exiting RC buildings. The experimental ... -
Modeling Force Transfer around Openings in Wood-Frame Shear Walls
(American Society of Civil Engineers, 2012)This paper presented a modeling study on force transfer around openings (FTAO) in wood-frame shear walls detailed for FTAO. To understand the load transfer in the walls, this study used a finite-element model WALL2D, which ... -
Shake Table Testing of Slender RC Shear Walls Subjected to Eastern North America Seismic Ground Motions
(American Society of Civil Engineers, 2012)This paper presents shake table test results on two identical 1:0.429 scaled, 8-story moderately ductile RC shear wall specimens under the expected high-frequency ground motion in eastern North America. The walls were ... -
Residual Stress Tests of High-Strength Steel Equal Angles
(American Society of Civil Engineers, 2012)Residual stress is one of the most important imperfections of steel structure members because of its significant effects on buckling behavior. To quantify the residual stresses in 420-MPa high-strength steel hot-rolled ...