Journal of Structural Engineering: Recent submissions
Now showing items 3861-3880 of 10765
-
Statistical Wavelet-Based Method for Structural Health Monitoring
(American Society of Civil Engineers, 2004)A statistical pattern classification method based on wavelet packet transform (WPT) is developed in this study for structural health monitoring. The core of this method is the WPT that has the ability of extracting minute ... -
Fatigue Reliability for Offshore Structures
(American Society of Civil Engineers, 1984)The results of a four‐year project, sponsored by the American Petroleum Institute, to investigate the fatigue design process in the welded joints of steel offshore structures are summarized. Fatigue damage expressions were ... -
Plastic Hinge Analysis
(American Society of Civil Engineers, 2001)Predicting behavior of plastic hinges subjected to large inelastic deformations caused by extreme loads such as earthquakes plays an important role in assessing maximum stable deformation capacities of framed concrete ... -
Finite Element for Anchored Bars under Cyclic Load Reversals
(American Society of Civil Engineers, 1997)The hysteretic behavior of reinforced concrete elements depends in large measure on the interaction between reinforcing steel and concrete through bond. This paper presents a new finite element for reinforcing bars anchored ... -
Closure to “Seismic Damage Detection of a Full-Scale Shaking Table Test Structure” by Xiaodong Ji, Gregory L. Fenves, Kouichi Kajiwara, and Masayoshi Nakashima
(American Society of Civil Engineers, 2012) -
Discussion of “Seismic Damage Detection of a Full-Scale Shaking Table Test Structure” by Xiaodong Ji, Gregory L. Fenves, Kouichi Kajiwara, and Masayoshi Nakashima
(American Society of Civil Engineers, 2012) -
Accidental Loads in Crane Girders: A Case Study
(American Society of Civil Engineers, 1984)In crane design an accidental action that should be considered is the failure of one of the hanging mechanisms during transport operations of large masses. In this paper, the case of a crane transporting a large mass ... -
Deformation-Controlled Design of Reinforced Concrete Flexural Members Subjected to Blast Loadings
(American Society of Civil Engineers, 2008)Both maximum displacement and displacement ductility factors should be considered in the design of a blast-resistant structure since both parameters correlate with an expected performance level of a reinforced concrete ... -
Evaluation of Rigidity of Extended End-Plate Connections
(American Society of Civil Engineers, 1997)Extended end-plate connections are usually regarded as rigid connections. This recognition has not been investigated systematically in frame analysis. The aim of this study is to evaluate the degree of rigidity of extended ... -
Postbuckling Behavior of Axially Restrained and Axially Loaded Steel Columns under Fire Conditions
(American Society of Civil Engineers, 2004)This paper presents the results of a theoretical study of the postbuckling behavior of an axially loaded steel column at elevated temperatures whose thermal expansion is restrained by the adjacent structural members. This ... -
Inelastic Behavior and Design of Steel Panel Zones
(American Society of Civil Engineers, 2000) -
Discussion of “<i>Seismic Panel Zone Design Effect on Elastic Story Drift in Steel Frames</i>” by Keh‐Chyuan Tsai and Egor P. Popov (December, 1990, Vol. 116, No. 12)
(American Society of Civil Engineers, 1992) -
Closure to “<i>Seismic Panel Zone Design Effect on Elastic Story Drift in Steel Frames</i>” by Keh‐Chyuan Tsai and Egor P. Popov (December, 1990, Vol. 116, No. 12)
(American Society of Civil Engineers, 1992) -
Discussion of “<i>Finite Element Modeling of Concrete Expansion and Confinement</i>” by F. J. Vecchio (September, 1992, Vol. 118, No. 9)
(American Society of Civil Engineers, 1994) -
Seismic Shear Strength of Reinforced Concrete Columns
(American Society of Civil Engineers, 1994)Aspects relating to the shear strength of circular and rectangular columns under seismic loading are presented. An examination of existing design equations reveals wide differences in predicted responses. Particular emphasis ... -
Structural Sensitivity as a Measure of Redundancy
(American Society of Civil Engineers, 1997)The conventional definition of redundancy is applicable to skeletal structural systems only, whereas the concept of redundancy has never been discussed in the context of a continuum. Generally, structures in civil engineering ... -
Semiactive Tuned Liquid Column Dampers: Experimental Study
(American Society of Civil Engineers, 2003)A tuned liquid column damper (TLCD) is a special type of auxiliary damping device which relies on the inertia of a liquid column in a U-tube to counteract the forces acting on the structure. Damping in the TLCD is introduced ... -
Active Control of Seismic‐Excited Buildings
(American Society of Civil Engineers, 1985)An investigation is made of the possible application of both the active tendon and active mass damper control systems to buildings excited by strong earthquakes. The effectiveness of both active control systems as measured ... -
Strength of Concrete Filled Steel Box Columns Incorporating Local Buckling
(American Society of Civil Engineers, 2000)Concrete filled steel box columns have recently experienced a renaissance in their use throughout the world. This has occurred due to the significant advantages that the construction method can provide. This paper deals ... -
Discussion of “Uniaxial Shear-Flexure Model for Reinforced Concrete Elements” by H. Mostafaei and F. J. Vecchio
(American Society of Civil Engineers, 2010)