Journal of Structural Engineering: Recent submissions
Now showing items 3841-3860 of 10765
-
Restrained Torsion of Thin-Walled Beams
(American Society of Civil Engineers, 2014)A first-order torsion formulation for closed thin-walled (CTW) beam subjected to restrained torsion is developed to consider the warping deformation and restrained shear stresses on cross section and their effect on the ... -
Discussion of “<i>Analytical Model for Concrete Confinement in Tied Columns</i>” by Shamim A. Sheikh and S. M. Uzumeri (December, 1982)
(American Society of Civil Engineers, 1983) -
Effects of Earthquake Ground Motion Selection and Scaling Method on Performance-Based Engineering of Wood-Frame Structures
(American Society of Civil Engineers, 2014)This paper examines the effects of procedures for both ground motion record selection and scaling on performance-based engineering tools underlying emerging seismic design procedures for engineered wood-frame structures. ... -
Evaluation of the Predictive Models for Stiffness, Strength, and Deformation Capacity of RC Frames with Masonry Infill Walls
(American Society of Civil Engineers, 2014)Buildings with masonry infill walls (MIWs) in reinforced concrete (RC) frames are commonly used all around the world. It is well known that infill walls may affect the strength, stiffness, and displacement ductility of the ... -
Hysteresis Behavior of Reinforced Concrete Walls
(American Society of Civil Engineers, 2014)Reinforced concrete walls are the primary lateral load-resisting systems in numerous multistory buildings and nuclear structures located in seismically active regions. Hence, hysteresis behavior prediction of structural ... -
Design of Reinforced Concrete Infilled Frames
(American Society of Civil Engineers, 2014)The work presented in this paper aimed to evaluate the diagonal strut model for the design of reinforced concrete (RC) infilled frames, already broadly used as a design tool in the case of masonry infilled RC frames. The ... -
Calibration of Current Factors in LRFD for Steel
(American Society of Civil Engineers, 1994)An independent review of the bases for the development of resistance factors found in the American Institute of Steel Construction's (AISC) 1986 -
Life-Cycle Reliability-Based Maintenance Cost Optimization of Deteriorating Structures with Emphasis on Bridges
(American Society of Civil Engineers, 2003)The assessment of the current state and the prediction of the future condition of deteriorating structures are crucial processes in the management of civil infrastructure systems. Not only time-varying loads and resistances ... -
Earthquake Energy Absorption in SDOF Structures
(American Society of Civil Engineers, 1984)The energy absorption in, and the inelastic behavior of, simple structures during strong earthquake excitation are investigated. The purposes of the investigation are to evaluate the performance of simple structures during ... -
Time-Dependent Reliability of Existing RC Structures
(American Society of Civil Engineers, 1997)The conditional probability of failure of a structure, given that it has already survived for -
Very Low Cycle Failure Process of Steel Angle Members
(American Society of Civil Engineers, 1996)This study investigates damage process to steel structural members after buckling by subjecting them to large repetitive deformations such as strong earthquake loading up to the ultimate cracking state. Experiments were ... -
Effect of Peak Ground <i>a/v</i> Ratio on Structural Damage
(American Society of Civil Engineers, 1988)Three sets of real earthquake records are selected to represent seismic ground motions in the low, normal, and high -
Review of Dynamics of Structures: Theory and Applications to Earthquake Engineering, Third Edition, by Anil K. Chopra
(American Society of Civil Engineers, 2007) -
Simple Method to Stabilize I‐Beams against Lateral Buckling
(American Society of Civil Engineers, 1993)Lateral restrained and free buckling of I‐beams often represent a limiting factor in their bending performance. Consideration of this becomes increasingly more important when the engineer seeks full advantage of new ... -
Crack Shear in Concrete: Crack Band Microflane Model
(American Society of Civil Engineers, 1984)The crack band model is applied to the problem of crack shear in concrete. The constitutive law for concrete within the crack band is provided by the microplane model, in which the microstrains on weak planes of various ... -
Special Issue: Commemorating 10 Years of Research since 9/11
(American Society of Civil Engineers, 2011) -
Behavior and Design of Steel Single Plate Shear Connections
(American Society of Civil Engineers, 1993)The behavior of single plate shear connections in steel structures is studied in this paper. Based on the analyses of the test data, new design procedures are developed and presented. The research and the design procedures ... -
Concrete-Filled HSS Connections
(American Society of Civil Engineers, 1995)A novel method of reinforcement for welded-truss connections between hollow structural sections (HSS), in which the chord member is filled with concrete, is described. The behavior of concrete-filled T-, X-, and gapped ... -
Strength of Slender Reinforced Concrete Columns
(American Society of Civil Engineers, 1998)This paper presents a numerical method, based on a simple transformation concept, for analyzing the failure loads of slender reinforced concrete columns under uniaxial bending. Both material and geometric nonlinearities ... -
Multiobjective Optimal Structural Vibration Control Using Fuzzy Logic Control System
(American Society of Civil Engineers, 2001)Fuzzy logic control systems have been applied as an effective control system in various fields, including vibration control of structures. The advantage of this approach is its inherent robustness and ability to handle ...