Journal of Structural Engineering: Recent submissions
Now showing items 2921-2940 of 10765
-
Application of a Translational Tuned Mass Damper Designed by Means of Genetic Algorithms on a Multistory Cross-Laminated Timber Building
(American Society of Civil Engineers, 2016)This paper presents a numerical study conducted on a seven-story timber building made of cross-laminated (X-lam) panels, equipped with a linear translational tuned mass damper (TMD). The TMD is placed on the top of the ... -
Modeling and Shock Tube Testing of Architectural Glazing Systems for Blast Resistance
(American Society of Civil Engineers, 2015)Building envelope is a critical line of defense against external explosions, and laminated glass can greatly reduce the hazard of flying shards. Blast-resistant glazing research exists, but few areas remain unexplored ... -
Review and Assessment of Design Methodologies for Perforated Steel Beams
(American Society of Civil Engineers, 2016)Designing perforated steel beams is always a practical challenge in steel construction. There are a number of design methods available in the literature for design of these structural members. However, the range of ... -
Experimental and Numerical Assessment of Woodframe Sheathing Layer Combinations for Use in Strength-Based and Performance-Based Design
(American Society of Civil Engineers, 2016)Woodframe buildings are unique in that the nonstructural finishes such as gypsum wall board and stucco provide significant stiffness and strength relative to the lateral force resisting system, e.g., wood shear walls. Wall ... -
Dynamic Imaging: Real-Time Detection of Local Structural Damage with Blind Separation of Low-Rank Background and Sparse Innovation
(American Society of Civil Engineers, 2016)Real-time close-up imaging (filming or video surveillance) of structures is used to automate detection of local component-level damage by exploiting the spatiotemporal data structure of the multiple temporal frames of ... -
Experimental Response of Brick-Masonry Spandrels under In-Plane Cyclic Loading
(American Society of Civil Engineers, 2016)This paper investigates the behavior of spandrels in perforated walls of existing unreinforced masonry buildings. The main results of experimental tests carried out on full-scale brick-masonry coupling beams under in-plane ... -
Shake Table Seismic Performance Assessment of Lightly Reinforced Concrete Block Shear Walls
(American Society of Civil Engineers, 2015)There is a need to develop a reinforced masonry (RM) seismic performance database (SPD) of experimental results in order to facilitate adoption of RM seismic force-resisting systems (SFRS) in the next generation of ... -
Application of Energy Dissipation Devices for Seismic Protection of Soft-Story Wood-Frame Buildings in Accordance with FEMA Guidelines
(American Society of Civil Engineers, 2016)Recent earthquakes have demonstrated the vulnerability of -
Experimental Study of the In-Plane Behavior of Confined Stone Masonry Walls
(American Society of Civil Engineers, 2016)Stone masonry construction is still a common practice in remote mountainous areas of many developing countries. Field investigations have shown that the traditional construction practices do not usually provide adequate ... -
Load Path Effects in Circular Steel Columns under Bidirectional Lateral Cyclic Loading
(American Society of Civil Engineers, 2015)Rigorous numerical analyses are conducted to study the effects of bidirectional lateral cyclic loading on the hysteretic response of stocky circular thin-walled steel columns. Four unidirectional and eight bidirectional ... -
Fracture Mechanics-Based Design of Column Splices with Partial Joint Penetration Welds
(American Society of Civil Engineers, 2016)Design standards in the United States mandate the use of complete joint penetration (CJP) welds for welded column splices (WCS) in high-seismic regions. However, recent experiments suggest that economical partial joint ... -
Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings
(American Society of Civil Engineers, 2016)Rigid wall-flexible diaphragm (RWFD) buildings are a common type of single-story construction in North America, Europe, and New Zealand that incorporate rigid in-plane concrete or masonry walls and flexible in-plane wood, ... -
Subassemblage Cyclic Loading Tests of Buckling-Restrained Braced RC Frames with Unconstrained Gusset Connections
(American Society of Civil Engineers, 2016)An unconstrained gusset connection for buckling restrained braces in reinforced concrete frame structures is proposed and tested as an effort to mitigate the complicated and usually harmful interactions between the steel ... -
Strengthening Slender Reinforced Concrete Columns Using High-Modulus Bonded Longitudinal Reinforcement for Buckling Control
(American Society of Civil Engineers, 2015)This paper introduces a model for strengthening slender reinforced concrete columns. The proposed technique aims at controlling second-order lateral deflections using longitudinal high-modulus bonded reinforcement, thereby ... -
Performance of T-Stub to CFT Joints Using Blind Bolts with Headed Anchors
(American Society of Civil Engineers, 2015)This paper assesses the performance of a newly developed blind bolt, intended for use in constructing bolted moment-resisting connections to concrete-filled tubular steel profiles. A total of ten connection tests are ... -
Structural Performance of Double-Skin Façade Systems Subjected to Blast Pressures
(American Society of Civil Engineers, 2015)The main function of a building façade system is to provide comfort and protection to interior building spaces. In a blast event, façade components become the weakest part of a building and the blast-induced shock wave may ... -
Erratum for “Performance-Based Seismic Design of Controlled Rocking Steel Braced Frames. II: Design of Capacity-Protected Elements” by Lydell Wiebe and Constantin Christopoulos
(American Society of Civil Engineers, 2015) -
Performance Control and Efficient Design of Rocking-Wall Moment Frames
(American Society of Civil Engineers, 2016)Rocking-wall moment frames (RWMFs) are unique, lateral resisting structures in which the shear wall pivots about its pinned base rather than act as a fixed base, upright cantilever. The function of the wall is to prevent ... -
Improving the Compression Behaviors of Perforated Plates with Slotted Holes Using Strengthening Stiffeners
(American Society of Civil Engineers, 2015)This research focuses on the strengthening methods used for improving the compression behaviors of plates perforated by slotted holes, as provided in steel bridge pylons for the purposes of access and service. The rectangular ...