Journal of Structural Engineering: Recent submissions
Now showing items 2941-2960 of 10765
-
Plastic Hinge Relocation Methods for Emulative PC Beam–Column Connections
(American Society of Civil Engineers, 2016)Various plastic hinge relocation methods were studied to improve the earthquake resistance of emulative precast concrete (PC) beam-column connections using PC U-shell beams. The present study used two strengthening methods ... -
Multiphase Performance Assessment of Structural Response to Seismic Excitations
(American Society of Civil Engineers, 2015)An alternative approach to the traditional method for performance assessment of structural systems is proposed. Denoted herein as the M-PARS method, this new approach is capable of tackling clusters of structural behavior ... -
Large-Scale Test of a Modular Steel Plate Shear Wall with Partially Encased Composite Columns
(American Society of Civil Engineers, 2016)As part of an experimental study on the behavior of steel plate shear walls with partially encased composite columns, a large-scale modular specimen was tested at the University of Alberta to observe and quantify some ... -
Effect of Panel Joints on the Performance of Cold-Formed-Steel Light-Frame Shear Walls
(American Society of Civil Engineers, 2015)Some existing qualification/validation data for alternatives to code-compliant light-frame cold-formed steel (CFS) shear wall construction were developed before requirements for test specimens with -
Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches
(American Society of Civil Engineers, 2015)This paper deals with experimental investigations into flexural-torsional ultimate resistance of in-plane-pinned circular steel arches. Three I-section arches with the same span but different rise-to-span ratios were tested ... -
Analysis and Design of Noncompact and Slender CFT Beam-Columns
(American Society of Civil Engineers, 2016)Concrete-filled steel tube (CFT) beam-columns are categorized as compact, noncompact, or slender depending on the governing slenderness ratio (width-to-thickness -
Collapse Resistance of Steel Columns under Combined Axial and Lateral Loading
(American Society of Civil Engineers, 2016)The collapse resistance of steel columns subjected to combined axial and reversed lateral loading is investigated computationally. Detailed finite-element models that are validated using available experimental data are ... -
Maximum Shear Strength of Slender RC Beams with Rectangular Cross Sections
(American Society of Civil Engineers, 2015)In the present study, the maximum shear strength of simply supported reinforced concrete beams with rectangular cross section was investigated. In beams with heavy shear reinforcement exceeding a certain limit, concrete ... -
Flexural Strengthening of Columns with CFRP Composites and Stainless Steel: Cyclic Behavior
(American Society of Civil Engineers, 2016)This study presents the testing, completion, and analysis of different external strengthening systems applied to rectangular reinforced concrete columns with rounded corners. The experimental study included confinement ... -
Behavior of Rectangular Reinforced-Concrete Columns under Biaxial Cyclic Loading and Variable Axial Loads
(American Society of Civil Engineers, 2016)The behavior of reinforced-concrete (RC) elements subjected to axial loading variation in conjunction with cyclic biaxial bending is recognized as a very important research topic with a reduced number of experimental results ... -
Shear Strength of RC Beams with Steel Stirrups
(American Society of Civil Engineers, 2016)Because of the complexity of the shear failure mechanism, most current design codes and guidelines are based on highly empirical approaches and consequently should only be used within the bounds of testing regimes from ... -
Equivalent Viscous Damping for Steel Moment-Resisting Frames with Cross-Laminated Timber Infill Walls
(American Society of Civil Engineers, 2016)In the direct displacement-based design method, energy dissipative capacity of structures can be represented by an equivalent viscous damping (EVD). A number of studies have been reported in the formulation of EVD for ... -
Performance of a 2-Story CLT House Subjected to Lateral Loads
(American Society of Civil Engineers, 2016)A 2-story full-scale model of a cross-laminated timber (CLT) house was tested under quasi-static monotonic and cyclic loading. The primary objectives were to investigate 3D system performance of a CLT structure subjected ... -
Assessment of the Strengthening of an RC Railway Bridge with CFRP Utilizing a Full-Scale Failure Test and Finite-Element Analysis
(American Society of Civil Engineers, 2015)A finite element (FE) model was calibrated using the data obtained from a full-scale test to failure of a 50 year old reinforced concrete (RC) railway bridge. The model was then used to assess the effectiveness of various ... -
Spectrum Models for Nonstationary Extreme Winds
(American Society of Civil Engineers, 2015)Nonstationary extreme winds are responsible for many structural damages. However, empirical models are not available for these winds, especially for fluctuations, mainly due to the difficulties in mathematical treatments. ... -
Framework for Incorporating Probabilistic Building Performance in the Assessment of Community Seismic Resilience
(American Society of Civil Engineers, 2016)A framework is presented for incorporating probabilistic building performance limit states in the assessment of community resilience to earthquakes. The limit states are defined on the basis of their implications to ... -
Capturing Out-of-Plane Shear Failures in the Analysis of Reinforced Concrete Shells
(American Society of Civil Engineers, 2015)A procedure for nonlinear analysis of RC slabs and shell structures is presented. Cracked RC is treated as an orthotropic material governed by a smeared rotating crack procedure and the constitutive formulations of the ... -
Large-Scale Hybrid Simulation of a Steel Moment Frame Building Structure through Collapse
(American Society of Civil Engineers, 2016)The implementation of two series of hybrid simulations that aim to trace the system-level seismic response of a four-story steel moment frame building structure through collapse is presented. In the first series of tests, ... -
Design Expressions for the In-Plane Shear Capacity of Confined Masonry Shear Walls Containing Squat Panels
(American Society of Civil Engineers, 2016)In-plane shear capacity formulation of reinforced masonry is commonly conceived as the sum of the capacities of three parameters, viz, the masonry, the reinforcement, and the precompression. The term “masonry” incorporates ... -
Implementable Bio-Inspired Passive Negative Spring Actuator for Full-Scale Structural Control under Seismic Excitation
(American Society of Civil Engineers, 2016)A bio-inspired passive negative spring actuator inspired by an energy-dissipating mechanism called sacrificial bonds and hidden length is designed, fabricated and implemented in a test case of a three-story structural model ...