Journal of Composites for Construction: Recent submissions
Now showing items 901-920 of 2137
-
Beam-Testing Method for Assessment of Bond Performance of FRP Bars in Concrete under Tension–Compression Reversed Cyclic Loading
(American Society of Civil Engineers, 2017)This paper presents a novel beam-testing method to assess the bond performance of fiber-reinforced polymer (FRP) bars in reinforced-concrete resisting systems subjected to tension–compression reversed cyclic loading. Special ... -
Shake Table Tests on FRP Retrofitted Masonry Building Models
(American Society of Civil Engineers, 2016)The current study is devised to evaluate the seismic performance of fiber-reinforced polymer (FRP) retrofitted buildings with openings at different FRP reinforcement levels. Required objectives are achieved by performing ... -
NSM CFRP Prestressing Techniques with Strengthening Potential for Simultaneously Enhancing Load Capacity and Ductility Performance
(American Society of Civil Engineers, 2016)The ductility performance of reinforced concrete (RC) members strengthened with carbon-fiber-reinforced polymer (CFRP) reinforcement using near-surface-mounted (NSM) technique has a tendency to decrease with the increase ... -
Effect of Natural Weathering on Durability of Pultruded Glass Fiber–Reinforced Bridge and Building Structures
(American Society of Civil Engineers, 2016)After 17 and 15 years of use, respectively, a detailed inspection of a pedestrian bridge and a 5-story building structure composed of partly adhesively bonded pultruded glass fiber–reinforced polymer (GFRP) profiles was ... -
Durability of Bridge Deck with FRP Stay-in-Place Structural Forms under Freeze-Thaw Cycles
(American Society of Civil Engineers, 2015)This study examines the effect of aggressive freeze-thaw (FT) cyclic exposure on strength and integrity of bridge decks built using glass fiber-reinforced polymer (GFRP) stay-in-place (SIP) structural forms that completely ... -
Design Equations for Concrete Bridge Decks with FRP Stay-in-Place Structural Forms
(American Society of Civil Engineers, 2016)Bridge deck construction using stay-in-place (SIP) fiber-reinforced polymer (FRP) structural forms has shown promise as an efficient, rapid, and low-waste alternative to conventional methods. Several studies have shown ... -
Bond Properties of Sand-Coated GFRP Bars with Fly Ash–Based Geopolymer Concrete
(American Society of Civil Engineers, 2016)Bond behavior is an important subject in the design and performance of reinforced concrete structures. In this research, the bond property between sand-coated glass fiber–reinforced polymer (GFRP) bars, a corrosion-resistant ... -
Experimental Study on Dynamic Behavior of CFRP-to-Concrete Interface
(American Society of Civil Engineers, 2016)Carbon fiber–reinforced polymer (CFRP) sheets/plates are widely used to strengthen deficient RC structures. Existing studies show that the effectiveness of externally bonded CFRP materials generally depends on the bond ... -
In-Plane Shear Performance of Masonry Walls after Strengthening by Two Different FRPs
(American Society of Civil Engineers, 2016)This experimental study was aimed to investigate the in-plane shear performance of externally strengthened masonry walls using two types of fiber-reinforced polymer (FRP) sheets, namely, carbon FRP (CFRP) and polyethylene ... -
Behavior of Large-Scale Hybrid FRP–Concrete–Steel Double-Skin Tubular Beams with Shear Connectors
(American Society of Civil Engineers, 2016)Hybrid fiber-reinforced polymer (FRP)–concrete–steel double-skin tubular members (DSTMs) are a new form of hybrid members that consist of an outer tube made of FRP and an inner tube made of steel, with the space between ... -
NSM CFRP Strengthening and Failure Loading of a Posttensioned Concrete Bridge
(American Society of Civil Engineers, 2016)Two carbon-fiber-reinforced polymer (CFRP) systems developed as possible means to strengthen existing concrete structures have been applied to a bridge at Kiruna (Sweden). The bridge was no longer in service and was thus ... -
Comparative Study on Static and Fatigue Performances of Pultruded GFRP Joints Using Ordinary and Blind Bolts
(American Society of Civil Engineers, 2015)Bolted connections are often used in pultruded glass fiber reinforced polymer (GFRP) structures. Blind bolts, which require installation from one side only, become convenient when access is limited to tighten the ordinary ... -
Load-Strain Model for Steel-Concrete-FRP-Concrete Columns in Axial Compression
(American Society of Civil Engineers, 2016)A load-strain model for a steel-concrete-FRP-concrete (SCFC) hybrid column section in compression is proposed. The section layout has a square steel tube as the outer layer and a circular fiber-reinforced polymer (FRP) ... -
Modified Push-Off Testing of an Inclined Shear Plane in Reinforced Concrete Strengthened with CFRP Fabric
(American Society of Civil Engineers, 2016)This study reports the findings of an experimental investigation into the behavior of an inclined shear plane in reinforced concrete, such as a diagonal crack in the web of a beam, strengthened with externally bonded carbon ... -
Analysis of FRP Shear Strengthening Solutions for Reinforced Concrete Beams Considering Debonding Failure
(American Society of Civil Engineers, 2016)In this paper, a fiber beam model previously developed by the authors for the nonlinear analysis of strengthened elements, including the effects of shear, is used to predict the response of reinforced concrete (RC) beams ... -
Use of CFRP to Maintain Composite Action for Continuous Steel–Concrete Composite Girders
(American Society of Civil Engineers, 2016)The loss of composite action at the negative moment region for a continuous composite girder reduces the girder’s strength and stiffness. This paper presents an experimental investigation into the use of carbon fiber–reinforced ... -
Evaluation of Damaged RC Columns with GFRP-Strip Device
(American Society of Civil Engineers, 2016)Damage of reinforced-concrete (RC) structures commonly occurs during major earthquakes, and becomes worse because of aftershocks. For these reasons, repair technology for seismic damage is needed to prevent possible collapse ... -
Experimental Investigations on Circular Concrete Columns Reinforced with GFRP Bars and Helices under Different Loading Conditions
(American Society of Civil Engineers, 2016)Glass-fiber-reinforced polymer (GFRP) bar has emerged as a preferable alternative to steel bar in reinforced concrete (RC) members in harsh, corrosive, coastal environments in order to eliminate corrosion problems. However, ... -
Tensile and Lap-Splice Shear Strength Properties of CFRP Composites at High Temperatures
(American Society of Civil Engineers, 2015)Carbon fiber–reinforced polymer (CFRP) composites are used to retrofit or reinforce existing civil infrastructure. When a new combination of carbon fiber/epoxy system is to be implemented, elevated temperature requirements ... -
Durability of Adhesively Bonded FRP-to-Concrete Joints
(American Society of Civil Engineers, 2016)The adhesive bonding of fiber-reinforced polymers (FRP) to tensile faces of reinforced concrete elements is now widely considered as a simple and effective means for enhancing load-carrying capacity and decreasing deflection. ...