Journal of Composites for Construction: Recent submissions
Now showing items 921-940 of 2137
-
Characterization of FRP Uwrap Anchors for Externally Bonded FRP-Reinforced Concrete Elements: An Experimental Study
(American Society of Civil Engineers, 2016)While the majority of U-shape wrapping (Uwrap) studies have focused on the mechanism of the shear-strengthening effect, very few studies have been devoted to the use of Uwraps as anchorage for longitudinal fiber-reinforced ... -
Impact Behavior of FRP-Strengthened RC Beams without Stirrups
(American Society of Civil Engineers, 2016)This study investigates the impact behavior of fiber-reinforced polymer (FRP)-strengthened reinforced concrete (RC) beams and FRP contribution to shear strength. Thirteen RC beams ( -
Advanced Strategies and Materials for Reinforcing Normal and Disturbed Regions in Brick Masonry Columns
(American Society of Civil Engineers, 2016)This work presents the results of an experimental investigation on the behavior of 42 solid clay brick masonry columns internally strengthened by fiber-reinforced polymer (FRP) fabrics or stainless steel grids placed in ... -
Concrete Contribution to Shear Strength of Beams Reinforced with Basalt Fiber-Reinforced Bars
(American Society of Civil Engineers, 2016)This paper reports on the shear behavior of concrete beams reinforced with basalt fiber-reinforced polymer (BFRP) bars. In this study, 10 reinforced concrete beams with no transverse reinforcement, including 2 beams ... -
Fracture Properties of CFRP–Concrete Bond Subjected to Three Environmental Conditions
(American Society of Civil Engineers, 2016)This paper presents results of a series of single shear tests of carbon fiber–reinforced polymer (CFRP) bonded concrete prisms exposed to three environmental conditions, namely, temperature cycles, wet-dry cycles, and ... -
Behavior of GFRP-RC Interior Slab-Column Connections with Shear Studs and High-Moment Transfer
(American Society of Civil Engineers, 2016)Six full-scale reinforced-concrete (RC) interior slab-column connections of glass fiber–reinforced polymer (GFRP) were constructed and tested to failure. The specimen consisted of a square slab with a 2,800-mm side length ... -
Experimental and Numerical Investigation of Elephant Foot Buckling and Retrofitting of Cylindrical Shells by FRP
(American Society of Civil Engineers, 2016)Large and small cylindrical shells have long been used as tanks and silos to store materials such as oil and its derivatives. The radius-to-thickness ratio of these shells is -
Effect of Shear Studs and High Moments on Punching Behavior of GFRP-RC Slab–Column Edge Connections
(American Society of Civil Engineers, 2016)This paper presents test results of six full-scale glass fiber-reinforced polymer (GFRP) reinforced concrete slab–column edge connections. The test connections included two series with three connections each. The connections ... -
Shear Capacity Comparison of Four Different Composite Interfaces between FRP Plates and Concrete Substrate
(American Society of Civil Engineers, 2016)The mechanical performance of four types of interfaces between fiber-reinforced polymer (FRP) plate and concrete was compared by double-lap-shear test. The study found that the failure characteristics of the four interfaces ... -
Nonlinear 2D Finite-Element Modeling of RC Beams Strengthened with Prestressed NSM CFRP Reinforcement
(American Society of Civil Engineers, 2016)This paper presents a comprehensive two-dimensional (2D) nonlinear finite-element (FE) analysis of reinforced concrete (RC) beams strengthened with prestressed or non-prestressed near-surface mounted (NSM) carbon ... -
Fiber-Element Modeling for Seismic Performance of Square RC Bridge Columns Retrofitted with NSM BFRP Bars and/or BFRP Sheet Confinement
(American Society of Civil Engineers, 2016)This paper presents an analysis of the seismic performance of square RC bridge columns retrofitted with near-surface-mounted (NSM) basalt fiber-reinforced polymer (BFRP) bars and/or BFRP sheet confinement based on fiber ... -
Composite Patch Configuration and Prestraining Effect on Crack Tip Deformation and Plastic Zone for Inclined Cracks
(American Society of Civil Engineers, 2016)Bonding a composite patch to a cracked steel section is an efficient technique to reinforce cracked members or to delay fatigue crack growth in the structural elements. In this paper, a numerical study was performed to ... -
Structural Behavior of All-FRP Beam-Column Plate-Bolted Joints
(American Society of Civil Engineers, 2016)Fiber-reinforced polymer (FRP) material is very interesting for its use as the sole material in the construction of structures because of its remarkable lightness, which reduces seismic forces; its ease of assembly; and ... -
Design Propositions for Hybrid FRP-Steel Reinforced Concrete Beams
(American Society of Civil Engineers, 2016)Concrete beams reinforced with a combination of steel and fiber-reinforced polymer (FRP) bars can provide increased strength, serviceability, and durability. However, the amounts of FRP and steel necessary to ensure ... -
Design-Oriented Stress–Strain Model for Concrete under Combined FRP-Steel Confinement
(American Society of Civil Engineers, 2016)Extensive research has been conducted on fiber-reinforced polymer (FRP)-confined plain and RC columns, leading to a large number of stress–strain models. Most of these models have been developed for FRP-confined plain ... -
Novel UHPC-CFRP Waffle Deck Panel System for Accelerated Bridge Construction
(American Society of Civil Engineers, 2016)A novel deck system is developed as an ultralightweight low profile waffle slab of ultrahigh-performance concrete (UHPC) reinforced with carbon-fiber-reinforced polymer (CFRP) bars. The proposed system lends itself to ... -
Corner Strip-Batten Technique for FRP-Confinement of Square RC Columns under Eccentric Loading
(American Society of Civil Engineers, 2016)In the present study, a new method is introduced for confining square concrete columns in which fiber-reinforced polymer (FRP) strips are used at corners and FRP battens on column sides. In this method, FRP battens confining ... -
Fatigue Behavior of Cracked Steel Plates Strengthened with Different CFRP Systems and Configurations
(American Society of Civil Engineers, 2016)Using carbon-fiber-reinforced polymer (CFRP) materials can extend the fatigue life of damaged steel structures. However, several issues still need to be studied. In this paper, experimental and numerical studies were ... -
Experimental Evaluation of Static Cyclic In-Plane Shear Behavior of Unreinforced Masonry Walls Strengthened with NSM FRP Strips
(American Society of Civil Engineers, 2015)An experimental study was conducted to assess the effectiveness of strengthening unreinforced-masonry (URM) shear panels with near surface-mounted (NSM) fiber-reinforced polymer (FRP) strips. A total of 23 wall panels (5 ... -
Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets
(American Society of Civil Engineers, 2016)The shear behavior of fiber-reinforced-polymer–strengthened reinforced concrete (FRP-strengthened RC) members is not fully developed and accurately predicted because of the lack of accurate constitutive laws for the ...