Journal of Composites for Construction: Recent submissions
Now showing items 1741-1760 of 2137
-
Multifunctional Hybrid GFRP/Steel Joint for Concrete Slab Structures
(American Society of Civil Engineers, 2006)A multifunctional hybrid glass fiber-reinforced polymer (GFRP)/steel joint has been developed for the transfer of compression and shear forces in thermal insulation sections of concrete slab structures used in building ... -
Seismic Behavior of High-Strength Concrete Columns Confined by Fiber-Reinforced Polymer Tubes
(American Society of Civil Engineers, 2006)The use of high-strength concrete (HSC) in seismically active regions poses a major concern because of the brittle nature of material. The confinement requirements for HSC columns may be prohibitively stringent when ordinary ... -
Strengthening of Interior Slab–Column Connections Using a Combination of FRP Sheets and Steel Bolts
(American Society of Civil Engineers, 2006)The results of an experimental investigation undertaken to evaluate a new technique for strengthening interior slab–column connection in combined flexural and shear modes are presented. The technique consists of using a ... -
CFRP Strengthening for Punching Shear of Interior Slab–Column Connections
(American Society of Civil Engineers, 2006)This paper presents the results of an experimental investigation studying the effect of retrofitting interior slab–column connections against punching shear failure with externally bonded carbon fiber reinforced polymer ... -
Journal of Composites for Construction Best Paper Awards
(American Society of Civil Engineers, 2006) -
Flexural Behavior of Hybrid FRP-Concrete-Steel Double-Skin Tubular Members
(American Society of Civil Engineers, 2006)This paper presents the results of an experimental study on the flexural behavior of a new type of hybrid FRP-concrete-steel member as well as results from a corresponding theoretical model based on the plane section ... -
Membrane-Based Forms for Innovative FRP Bridge Systems through Structural Optimization
(American Society of Civil Engineers, 2006)The use of fiber-reinforced polymer (FRP) composites for new construction is still limited primarily due to high costs and designs based on shapes best suitable to conventional materials. The layered and fiber dominated ... -
Discussion of “Behavior of Aramid Fiber-Reinforced Polymer Reinforced High Strength Concrete Beams under Bending” by M. A. Rashid, M. A. Mansur, and P. Paramasivam
(American Society of Civil Engineers, 2006) -
Flexural Fatigue Behavior of Reinforced Concrete Beams Strengthened with FRP Fabric and Precured Laminate Systems
(American Society of Civil Engineers, 2006)Rehabilitation of existing structures with carbon fiber reinforced polymers (CFRP) has been growing in popularity because they offer resistance to corrosion and a high stiffness-to-weight ratio. This paper presents the ... -
Residual Tensile Properties of GFRP Reinforcing Bars after Loading in Severe Environments
(American Society of Civil Engineers, 2006)The long-term behavior of glass fiber-reinforced polymer (GFRP) reinforcing bars is one of the most critical issues for the acceptance of these materials as reinforcement for concrete structures. There is a high demand for ... -
Bond of GFRP Bars in Concrete: Experimental Study and Analytical Interpretation
(American Society of Civil Engineers, 2006)The local bond mechanics of glass-fiber reinforced polymer (GFRP) bars in normal strength concrete was investigated through experimental testing and analytical modeling. The experimental program was comprised of 30 direct ... -
Wood Members Strengthened with Mechanically Fastened FRP Strips
(American Society of Civil Engineers, 2006)The demand for a rapid technique to strengthen existing wood bridge structural elements is evident in military and civilian sectors. An experimental program was undertaken to evaluate the feasibility of increasing the ... -
Approximate Series Solution for Analysis of FRP Composite Highway Bridges
(American Society of Civil Engineers, 2006)The design of a deck-and-stringer bridge system is usually reduced to the analysis of a T-beam section, loaded by concentrated loads corresponding to an equivalent fraction of the applied truck load. This equivalent load ... -
Analysis and Design Procedure for FRP-Strengthened Prestressed Concrete T-Girders Considering Strength and Fatigue
(American Society of Civil Engineers, 2006)Controlling the prestressing strand-stress range in precracked prestressed concrete girders is critical in the FRP strengthening process to avoid long-term fatigue failures. This paper will address the details of a design ... -
Acoustic Emission Damage Assessment of Steel/CFRP Bonds for Rehabilitation
(American Society of Civil Engineers, 2006)The use of adhesively bonded carbon fiber reinforced polymer (CFRP) laminates is increasingly being considered for the rehabilitation of metallic structures. The effective structural monitoring of steel/CFRP adhesive joints ... -
Experimental Investigation on Torsional Behavior of Solid and Box-Section RC Beams Strengthened with CFRP Using Photogrammetry
(American Society of Civil Engineers, 2006)The construction boom over the last century has resulted in a mature infrastructure network in developed countries. Lately, the issue of maintenance and repair/upgrading of existing structures has become a major issue, ... -
Durability Prediction for GFRP Reinforcing Bars Using Short-Term Data of Accelerated Aging Tests
(American Society of Civil Engineers, 2006)This paper presents a procedure based on the Arrhenius relation to predict the long-term behavior of glass fiber-reinforced polymer (GFRP) bars in concrete structures, based on short-term data from accelerated aging tests. ... -
Verifications of Design Equations of Beams Externally Strengthened with FRP Composites
(American Society of Civil Engineers, 2006)Based on the test information available in the literature since 1990, a comprehensive database is assembled for an extensive survey of existing studies on the flexural behavior of reinforced concrete beams externally ... -
Bond Behavior of Near-Surface Mounted CFRP Laminate Strips under Monotonic and Cyclic Loading
(American Society of Civil Engineers, 2006)Near-surface mounted (NSM) carbon fiber reinforced polymer (CFRP) laminate strips are used to increase the load-carrying capacity of concrete structures. This is done by inserting the CFRP strips into slits made in the ... -
Use of Fiber-Reinforced Polymer Composite Elements to Enhance Structural Steel Member Ductility
(American Society of Civil Engineers, 2006)An innovative use of fiber-reinforced polymer composite materials to control the manifestation of local buckling in a steel section during plastic hinging is discussed in the present work. This discussion focuses on a ...