Journal of Composites for Construction: Recent submissions
Now showing items 1441-1460 of 2137
-
Experimental Investigation of the Influence of Moisture on the Bond Behavior of FRP to Concrete Interfaces
(American Society of Civil Engineers, 2010)The effects of moisture on the initial and long-term bonding behavior of fiber reinforced polymer (FRP) sheets to concrete interfaces have been investigated by means of a two-year experimental exposure program. The research ... -
Wet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components
(American Society of Civil Engineers, 2010)The assessment of durability of fiber-reinforced polymers (FRPs), used to strengthen masonry or concrete structures, if subjected to weathering is a knotty problem. Environmental factors can have a significant effect on ... -
Structural Performance of CFRP-Strengthened RC Slabs in a Corrosive Environment
(American Society of Civil Engineers, 2010)This study was undertaken to address the effect of the main steel corrosion on the structural performance of RC slabs strengthened with carbon-fiber-reinforced polymer (CFRP) strips and exposed to a corrosive environment. ... -
Numerical Model for Tracing the Response of FRP-Strengthened RC Beams Exposed to Fire
(American Society of Civil Engineers, 2010)This paper presents the development of a numerical model for evaluating the performance of fiber-reinforced polymer (FRP)-strengthened RC beams under fire conditions. The model is based on a macroscopic finite-element ... -
Flexural Response of Concrete Beams Prestressed with AFRP Tendons: Numerical Investigation
(American Society of Civil Engineers, 2010)This paper presents the flexure of concrete beams prestressed with aramid fiber-reinforced polymer (AFRP) tendons. Three-dimensional nonlinear finite-element analysis and iterative sectional analysis are conducted to predict ... -
FRP-Retrofitted URM Walls under In-Plane Shear: Review and Assessment of Available Models
(American Society of Civil Engineers, 2010)In the last two decades, several seismic retrofitting techniques for masonry structures have been developed and practiced and fiber-reinforced polymer (FRP) material has been increasingly used owing to its high strength/stiffness ... -
Sustained-Load and Fatigue Performance of a Hybrid FRP-Concrete Bridge Deck System
(American Society of Civil Engineers, 2010)The design and construction of bridge systems with long-term durability and low maintenance requirements is a significant challenge for bridge engineers. One possible solution to this challenge could be through the use of ... -
In-Plane Shear Behavior of Masonry Panels Strengthened with NSM CFRP Strips. I: Experimental Investigation
(American Society of Civil Engineers, 2010)An experimental investigation was conducted to study the in-plane shear behavior of masonry panels strengthened with near-surface mounted (NSM) carbon fiber-reinforced polymer strips (CFRP). As part of the study four ... -
Study of Stress Intensity Factor of a Cracked Steel Plate with a Single-Side CFRP Composite Patching
(American Society of Civil Engineers, 2010)Composite fiber patching techniques have been considered as alternatives to traditional methods of strengthening and fatigue crack repair in steel structures. It is known that the fatigue strength of a cracked steel element ... -
Unreinforced Concrete Masonry Walls Strengthened with CFRP Sheets and Strips under Pendulum Impact
(American Society of Civil Engineers, 2010)Impact tests using drop-weight pendulum on nine 1.2-m-high full-scale concrete masonry block walls were conducted to investigate the out-of-plane impact behavior of unreinforced masonry (URM) walls externally strengthened ... -
Prestressed CFRP for Strengthening of Reinforced Concrete Structures: Recent Developments at Empa, Switzerland
(American Society of Civil Engineers, 2011)In civil engineering today, only 20 to 30% of the strength of carbon-fiber-reinforced polymer (CFRP) strips is used when they are applied as externally bonded strips for flexural and shear strengthening or in confinement ... -
Numerical Investigation of Creep Effects on FRP-Strengthened RC Beams
(American Society of Civil Engineers, 2010)Numerical analysis using a finite-element model was performed to simulate and investigate the long-term behavior of two RC beams with similar steel reinforcement, cast from the same batch of concrete. One beam was a plain ... -
FE Modeling of FRP-Repaired Planar Concrete Elements Subjected to Monotonic and Cyclic Loading
(American Society of Civil Engineers, 2010)In this paper, a nonlinear finite-element model is developed for the analysis of plane stress members, such as RC beams and walls, strengthened either unidirectionally or bidirectionally with fiber-reinforced polymer (FRP) ... -
Seismic Rehabilitation of Corner RC Beam-Column Joints Using CFRP Composites
(American Society of Civil Engineers, 2010)In this paper, efficiency and effectiveness of carbon fiber reinforced polymers (CFRPs) in upgrading the shear strength and ductility of seismically deficient corner or knee reinforced concrete beam-column joints have been ... -
Environmental Reduction Factors for GFRP Bars Used as Concrete Reinforcement: New Scientific Approach
(American Society of Civil Engineers, 2010)This paper presents a new approach that incorporates the effects of temperature, design life, and relative humidity (RH) of exposure into the environmental reduction factor (RF) for glass fiber reinforced polymer (GFRP) ... -
Assessment of the Electromagnetic Disturbance of a Glass Fiber Reinforced Composite Fencing Structure
(American Society of Civil Engineers, 2010)This work addresses the assessment of the electromagnetic disturbance induced by a composite barrier—fencing airport structures—to radio-communication electromagnetic waves. The barrier is composed of glass fiber reinforced ... -
Analytical Model for FRP Confinement of Concrete Columns with and without Internal Steel Reinforcement
(American Society of Civil Engineers, 2010)The paper aims to contribute to a better understanding of the behavior of reinforced concrete columns confined with fiber-reinforced polymer (FRP) sheets. In particular, some new insights on interaction mechanisms between ... -
Analytical Model for Circular Normal- and High-Strength Concrete Columns Confined with FRP
(American Society of Civil Engineers, 2010)This paper presents a new incremental stress-strain model for fiber-reinforced polymer (FRP)-confined concrete. The model, able to accommodate concrete with a wide range of strength (25–110 MPa), is based on material ... -
Evaluation of Bond Strength in Concrete Elements Externally Reinforced with CFRP Sheets and Anchoring Devices
(American Society of Civil Engineers, 2010)Use of anchoring devices can be useful to avoid or delay end debonding failure in reinforced concrete elements externally bonded with fiber-reinforced plastic materials. Many theoretical formulations are now available to ... -
Behavior and Effectiveness of FRP Wrap in the Confinement of Large Concrete Cylinders
(American Society of Civil Engineers, 2010)This paper presents the results of an experimental investigation on the strength and behavior of large 250 mm diameter concentrically loaded unreinforced fiber-reinforced polymer (FRP) confined concrete cylinders. In this ...