Now showing items 1421-1440 of 2137

    • Time-Dependent Behavior of RC Beams Retrofitted with CFRP Straps 

      Neil A. Hoult; Janet M. Lees (American Society of Civil Engineers, 2011)
      A retrofitting technique that uses prestressed unbonded carbon-fiber-reinforced polymer (CFRP) straps to provide additional shear capacity has previously been shown to be successful under short-term static loading conditions. ...
    • Behavior of FRP-Retrofitted Joints Built with Plain Bars and Low-Strength Concrete 

      Alper Ilki; Idris Bedirhanoglu; Nahit Kumbasar (American Society of Civil Engineers, 2011)
      Two series of tests on eight full-scale exterior beam-column joint subassemblages built with plain bars and low-strength concrete were conducted. No transverse reinforcement was present in the joint cores. In the first ...
    • Evaluation of Shear Design Equations of Concrete Beams with FRP Reinforcement 

      Ahmed K. El-Sayed; Khaled Soudki (American Society of Civil Engineers, 2011)
      Several codes and design guidelines addressing fiber-reinforced polymer (FRP) bars as primary reinforcement for structural concrete have been recently published worldwide. This reflects the great progress in FRP research ...
    • Shear Strengthening of RC Beams with EB FRP: Influencing Factors and Conceptual Debonding Model 

      Amir Mofidi; Omar Chaallal (American Society of Civil Engineers, 2011)
      This paper deals with the shear strengthening of RC beams using externally bonded (EB) fiber-reinforced polymers (FRP). Current code provisions and design guidelines related to shear strengthening of RC beams with FRP are ...
    • Finite-Element Modeling of Intermediate Crack Debonding in FRP-Plated RC Beams 

      G. M. Chen; J. G. Teng; J. F. Chen (American Society of Civil Engineers, 2011)
      Intermediate crack-induced debonding (IC debonding) is a common failure mode of RC beams strengthened with externally bonded fiber-reinforced polymer (FRP) reinforcement. Although extensive research has been carried out ...
    • Structural Evaluation of Full-Scale FRP-Confined Reinforced Concrete Columns 

      Antonio De Luca; Fabio Nardone; Fabio Matta; Antonio Nanni; Gian Piero Lignola; Andrea Prota (American Society of Civil Engineers, 2011)
      The external confinement of RC columns by means of externally bonded fiber-reinforced polymer (FRP) laminates is a well established technique for strengthening and retrofitting purposes. This paper presents a pilot research ...
    • Innovative Hybrid Reinforcement for Flexural Members 

      Emad El-Sayed Etman (American Society of Civil Engineers, 2011)
      The capacity and ductility of RC slabs are affected by the use of fiber-reinforced polymer (FRP) as their main reinforcement for repair and rehabilitation. The balance between increasing the capacity and reducing the ...
    • Experimental Bond Behavior of FRP Sheets Glued on Brick Masonry 

      Daniel V. Oliveira; Ismael Basilio; Paulo B. Lourenço (American Society of Civil Engineers, 2011)
      This paper deals with the experimental characterization of the mechanical tensile and shear bond behavior of fiber-reinforced polymer (FRP) sheets externally glued on masonry prisms, in terms of load capacity and stress ...
    • Bond Performance of Near-Surface-Mounted FRP Bars 

      Shehab M. Soliman; Ehab El-Salakawy; Brahim Benmokrane (American Society of Civil Engineers, 2011)
      Near-surface-mounted (NSM) reinforcement has become a well-known method for strengthening existing concrete structures. The bond between the NSM reinforcing bars and concrete is the key factor in the NSM technique. In the ...
    • Flexural Behavior of GFRP-Reinforced Concrete Masonry Beams 

      Khaled Galal; Munir Alp Enginsal (American Society of Civil Engineers, 2011)
      An experimental and analytical study is conducted in order to investigate the flexural behavior of masonry beams that are internally reinforced using glass fiber-reinforced polymers (GFRP) rebars. Seven reinforced masonry ...
    • Mechanism of Bond Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Rods 

      Noran Wahab; Khaled A. Soudki; Timothy Topper (American Society of Civil Engineers, 2011)
      Bond tests were conducted on concrete beams strengthened with near-surface-mounted (NSM) nonprestressed and prestressed carbon fiber-reinforced polymer (CFRP) rods under static loading. In the NSM technique, the CFRP rods ...
    • Small Beam Bond Test Method for CFRP Composites Applied to Concrete 

      Amber Gartner; Elliot P. Douglas; Charles W. Dolan; H. R. Hamilton (American Society of Civil Engineers, 2011)
      This paper presents the development of a test method that can be used to test the bond capacity of carbon fiber-reinforced polymer (CFRP) composites bonded to concrete. The rationale for the selection of the test method ...
    • Effect of Partial Unbonding on Prestressed Near-Surface-Mounted CFRP-Strengthened Concrete T-Beams 

      Han T. Choi; Jeffrey S. West; Khaled A. Soudki (American Society of Civil Engineers, 2011)
      The flexural behavior of RC T-beams strengthened with prestressed near-surface-mounted (NSM) carbon fiber-reinforced-polymer (CFRP) reinforcement was investigated. The specific objective was to study the effect of partial ...
    • Flexural Behavior of Continuous FRP-Reinforced Concrete Beams 

      Mostafa El-Mogy; Amr El-Ragaby; Ehab El-Salakawy (American Society of Civil Engineers, 2010)
      Continuous concrete beams are commonly used elements in structures such as parking garages and overpasses, which might be exposed to extreme weather conditions and the application of deicing salts. The use of the ...
    • In-Plane Shear Behavior of Masonry Panels Strengthened with NSM CFRP Strips. II: Finite-Element Model 

      Robert B. Petersen; Mark J. Masia; Rudolf Seracino (American Society of Civil Engineers, 2010)
      A combined experimental and numerical program was conducted to study the in-plane shear behavior of clay brick masonry walls strengthened with near surface mounting carbon-fiber-reinforced polymer (CFRP) strips. This paper ...
    • Use of Mixed-Mode Fracture Interfaces for the Modeling of Large-Scale FRP-Strengthened Beams 

      Jae Ha Lee; Rose M. Chacko; Maria M. Lopez (American Society of Civil Engineers, 2010)
      In this study, numerical models of fiber-reinforced polymer (FRP)-strengthened beams were developed using nonlinear fracture mechanics for the modeling of the concrete-FRP (longitudinal and U-wrap) interfaces. Mode 1, Mode ...
    • Investigation into the Effect of Bonding on FRP-Wrapped Cylindrical Concrete Columns 

      Arghya Deb; S. K. Bhattacharyya (American Society of Civil Engineers, 2010)
      In this paper the failure of a three layer system comprising a concrete column, an intermediate epoxy layer, and fiber-reinforced polymer (FRP) confinement is investigated. We perform a series of numerical experiments to ...
    • Moving-Wheel Fatigue for Bridge Decks Strengthened with CFRP Strips Subject to Negative Bending 

      Isamu Yoshitake; Yail J. Kim; Keiyu Yumikura; Sumio Hamada (American Society of Civil Engineers, 2010)
      This paper presents the negative bending of reinforced concrete slabs strengthened with near-surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strips. Six slab specimens, three of which are strengthened with ...
    • Fatigue Flexural Behavior of Corroded Reinforced Concrete Beams Repaired with CFRP Sheets 

      Rania Al-Hammoud; Khaled Soudki; Timothy H. Topper (American Society of Civil Engineers, 2011)
      This study investigated the flexural behavior of corroded steel reinforced concrete beams repaired with carbon-fiber-reinforced polymer (CFRP) sheets under repeated loading. Thirty beams
    • Bond Performance of GFRP Bars in Tension: Experimental Evaluation and Assessment of <i>ACI 440 Guidelines</i> 

      M. Harajli; M. Abouniaj (American Society of Civil Engineers, 2010)
      The development/splice strength and the pullout local bond stress-slip response of glass fiber-reinforced polymer (GFRP) bars in tension were experimentally investigated using beam specimens and pullout specimens, respectively. ...