Effects of Cooling Films on the Heat Transfer Coefficient on a Flat Plate With Zero Mainstream Pressure Gradient

Abstract

The influence of injection of cooling films through a row of holes on the heat transfer coefficient on a flat plate is investigated for a range of mass flux ratio using a heat-mass transfer analogy. Injection angles of 35 deg and 90 deg are covered. The experimental technique employed uses a swollen polymer surface and laser holographic interferometry. The results presented show the change in local heat transfer coefficient over the no-injection values at the centerline and off-centerline locations for various streamwise stations. The effect of injection on laterally averaged heat transfer coefficients is also assessed.