| contributor author | J. Liss | |
| contributor author | W. Goldsmith | |
| contributor author | F. E. Hauser | |
| date accessioned | 2017-05-08T23:14:43Z | |
| date available | 2017-05-08T23:14:43Z | |
| date copyright | September, 1983 | |
| date issued | 1983 | |
| identifier issn | 0021-8936 | |
| identifier other | JAMCAV-26223#694_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/96631 | |
| description abstract | An experimental program was conducted to determine the increase in flow stress relative to simple uniaxial compression for 2024-0 aluminum plates subjected to symmetric quasistatic compression by steel punches and to dynamic compression using the Kolsky (split Hopkinson-bar) technique. An average constraint factor of 2 was determined experimentally for a ratio of specimen thickness to bar diameter of 0.5 for the quasi-static case. This correlated well with the value predicted theoretically. Under dynamic conditions the constraint factor at yield stress was found to be slightly lower at a value of 1.75 and appeared to be nearly independent of strain rate over the test range from 103 to 1.5 × 104 s−1 . | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Constraint to Side Flow in Plates | |
| type | Journal Paper | |
| journal volume | 50 | |
| journal issue | 3 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.3167119 | |
| journal fristpage | 694 | |
| journal lastpage | 698 | |
| identifier eissn | 1528-9036 | |
| keywords | Flow (Dynamics) | |
| keywords | Plates (structures) | |
| keywords | Compression | |
| keywords | Thickness | |
| keywords | Yield stress | |
| keywords | Steel | |
| keywords | Stress AND Aluminum plate | |
| tree | Journal of Applied Mechanics:;1983:;volume( 050 ):;issue: 003 | |
| contenttype | Fulltext | |
