Minimum Energy-Loss Control of Electro- and Hydro-Mechanical Modulated Convertor DrivesSource: Journal of Mechanical Design:;1981:;volume( 103 ):;issue: 001::page 48Author:D. Karnopp
DOI: 10.1115/1.3254877Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Most servomechanism drives optimized for speed of response are incapable of returning any of the energy stored in a reactive load to the source. Even transmissions incorporating dynamic braking are often not fully optimized with respect to energy recovery. In this paper, drives based on modulated convertors such as separately excited d.c. motors and variable-displacement hydraulic motors are studied to discover optimum control strategies for operation in all four quadrants of the torque-speed plane, i.e., for power supply and recovery. Quite different results are found for the two nominally analogous types of converters. Although several types of energy loss are not considered in the simplified mathematical models used, the effects of electrical armature resistance and hydraulic line pressure loss together with constant voltage and constant pressure accumulators indicate basically different optimum control strategies. For the types of systems studied, it is found that gyrotors such as electric motors have good efficiency for sustained high speeds while transformer systems such as hydraulic motors are relatively more efficient for transient operation near zero speed. Naturally, the absolute efficiency of a practical drive system depends on a number of additional factors not considered here.
keyword(s): Energy dissipation , Pressure , Hydraulic motors , Stress , Torque , Electric potential , Electric motors , Servomechanisms , Motors , Electrical resistance , Energy recovery , Displacement , Secondary cells AND Dynamic braking ,
|
Collections
Show full item record
contributor author | D. Karnopp | |
date accessioned | 2017-05-08T23:11:51Z | |
date available | 2017-05-08T23:11:51Z | |
date copyright | January, 1981 | |
date issued | 1981 | |
identifier issn | 1050-0472 | |
identifier other | JMDEDB-27983#48_1.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/94971 | |
description abstract | Most servomechanism drives optimized for speed of response are incapable of returning any of the energy stored in a reactive load to the source. Even transmissions incorporating dynamic braking are often not fully optimized with respect to energy recovery. In this paper, drives based on modulated convertors such as separately excited d.c. motors and variable-displacement hydraulic motors are studied to discover optimum control strategies for operation in all four quadrants of the torque-speed plane, i.e., for power supply and recovery. Quite different results are found for the two nominally analogous types of converters. Although several types of energy loss are not considered in the simplified mathematical models used, the effects of electrical armature resistance and hydraulic line pressure loss together with constant voltage and constant pressure accumulators indicate basically different optimum control strategies. For the types of systems studied, it is found that gyrotors such as electric motors have good efficiency for sustained high speeds while transformer systems such as hydraulic motors are relatively more efficient for transient operation near zero speed. Naturally, the absolute efficiency of a practical drive system depends on a number of additional factors not considered here. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Minimum Energy-Loss Control of Electro- and Hydro-Mechanical Modulated Convertor Drives | |
type | Journal Paper | |
journal volume | 103 | |
journal issue | 1 | |
journal title | Journal of Mechanical Design | |
identifier doi | 10.1115/1.3254877 | |
journal fristpage | 48 | |
journal lastpage | 53 | |
identifier eissn | 1528-9001 | |
keywords | Energy dissipation | |
keywords | Pressure | |
keywords | Hydraulic motors | |
keywords | Stress | |
keywords | Torque | |
keywords | Electric potential | |
keywords | Electric motors | |
keywords | Servomechanisms | |
keywords | Motors | |
keywords | Electrical resistance | |
keywords | Energy recovery | |
keywords | Displacement | |
keywords | Secondary cells AND Dynamic braking | |
tree | Journal of Mechanical Design:;1981:;volume( 103 ):;issue: 001 | |
contenttype | Fulltext |