Show simple item record

contributor authorE. Reissner
date accessioned2017-05-08T23:10:19Z
date available2017-05-08T23:10:19Z
date copyrightSeptember, 1981
date issued1981
identifier issn0021-8936
identifier otherJAMCAV-26182#601_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/94111
description abstractEquations for small finite displacements of shear-deformable plates are used to derive a one-dimensional theory of finite deformations of straight slender beams with one cross-sectional axis of symmetry. The equations of this beam theory are compared with the corresponding case of Kirchhoff’s equations, and with a generalization of Kirchhoff’s equations which accounts for the deformational effects of cross-sectional forces. Results of principal interest are: 1. The equilibrium equations are seven rather than six, in such a way as to account for cross-sectional warping. 2. In addition to the usual six force and moment components of beam theory, there are two further stress measures, (i) a differential plate bending moment, as in the corresponding linear theory, and (ii) a differential sheet bending moment which does not occur in linear theory. The general results are illustrated by the two specific problems of finite torsion of orthotropic beams, and of the buckling of an axially loaded cantilever, as a problem of bending-twisting instability caused by material anisotropy.
publisherThe American Society of Mechanical Engineers (ASME)
titleOn a One-Dimensional Theory of Finite Torsion and Flexure of Anisotropic Elastic Plates
typeJournal Paper
journal volume48
journal issue3
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.3157681
journal fristpage601
journal lastpage605
identifier eissn1528-9036
keywordsTorsion
keywordsBending (Stress)
keywordsElastic plates
keywordsEquations
keywordsForce
keywordsDeformation
keywordsStress
keywordsAnisotropy
keywordsEquilibrium (Physics)
keywordsShear (Mechanics)
keywordsWarping
keywordsPlates (structures)
keywordsBuckling AND Cantilevers
treeJournal of Applied Mechanics:;1981:;volume( 048 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record