| contributor author | D. Popgoshev | |
| contributor author | R. Valori | |
| date accessioned | 2017-05-08T23:10:02Z | |
| date available | 2017-05-08T23:10:02Z | |
| date copyright | April, 1980 | |
| date issued | 1980 | |
| identifier issn | 0742-4787 | |
| identifier other | JOTRE9-28632#253_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/93969 | |
| description abstract | Two advanced carburizing grade gear steels were evaluated and compared against an AMS 6260 baseline material. Each material was evaluated on three lubricants (an unformulated ester basestock, a qualified MIL-L-23699B lubricant, and an advanced MIL-L-23699 type lubricant) to determine their gear scuffing/scoring capacities. The results show that (a) a 3Ni-4.5Mo alloy is superior to a 3Ni-2Cu alloy and to the AMS 6260 alloy with the lubricants evaluated, (b) the 3Ni-2Cu alloy is superior to the AMS 6260 with the fully formulated lubricants, and (c) the advanced MIL-L-23699 type lubricant showed significant load carrying capacity improvements for all three gear steels. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Scuffing Resistance of Advanced Gear Material/Lubricant Combinations | |
| type | Journal Paper | |
| journal volume | 102 | |
| journal issue | 2 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.3251491 | |
| journal fristpage | 253 | |
| journal lastpage | 255 | |
| identifier eissn | 1528-8897 | |
| keywords | Electrical resistance | |
| keywords | Lubricants | |
| keywords | Gears | |
| keywords | Alloys | |
| keywords | Steel | |
| keywords | Ester | |
| keywords | Carburization AND Load bearing capacity | |
| tree | Journal of Tribology:;1980:;volume( 102 ):;issue: 002 | |
| contenttype | Fulltext | |