| contributor author | R. Doré | |
| contributor author | S. Deslauriers | |
| date accessioned | 2017-05-08T22:59:29Z | |
| date available | 2017-05-08T22:59:29Z | |
| date copyright | February, 1975 | |
| date issued | 1975 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27618#153_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/87942 | |
| description abstract | A technique is presented for the analysis of deflection and stresses in helical compression or tension springs of rectangular cross-section. The technique consists in analyzing the deflection and stresses in a circular plate cut radially. Using the theory of elastic dislocations, a stress system is determined which gives as the resultant over any terminal cross-section, a single force acting along the axis of the plate. If the pitch angle of the spring is neglected, the stresses in a helical spring are obtained. The deflection and stresses are evaluated in terms of the dimensions of the spring and compared with the results of other theories. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Design of Springs Made of Flat Material | |
| type | Journal Paper | |
| journal volume | 97 | |
| journal issue | 1 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.3438529 | |
| journal fristpage | 153 | |
| journal lastpage | 156 | |
| identifier eissn | 1528-8935 | |
| keywords | Design | |
| keywords | Springs | |
| keywords | Stress | |
| keywords | Deflection | |
| keywords | Dislocations | |
| keywords | Tension | |
| keywords | Compression | |
| keywords | Force AND Dimensions | |
| tree | Journal of Manufacturing Science and Engineering:;1975:;volume( 097 ):;issue: 001 | |
| contenttype | Fulltext | |