| contributor author | Robert E. Cunningham | |
| contributor author | Edgar J. Gunter | |
| contributor author | David P. Fleming | |
| date accessioned | 2017-05-08T22:59:09Z | |
| date available | 2017-05-08T22:59:09Z | |
| date copyright | November, 1975 | |
| date issued | 1975 | |
| identifier issn | 1087-1357 | |
| identifier other | JMSEFK-27631#1383_1.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/87777 | |
| description abstract | A single mass flexible rotor analysis was used to optimize the stiffness and damping of a flexible support for a symmetric five-mass rotor. The flexible support attenuates the rotor motions and forces transmitted to the support bearings when the rotor operates through and above its first bending critical speed. An oil squeeze-film damper was designed based on short bearing lubrication theory. The damper design was verified by an unbalance response computer program. Rotor amplitudes were reduced by a factor of 16 and loads reduced by a factor of 36 compared with the same rotor on rigid bearing supports. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Design of a Squeeze-Film Damper for a Multi-Mass Flexible Rotor | |
| type | Journal Paper | |
| journal volume | 97 | |
| journal issue | 4 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.3438794 | |
| journal fristpage | 1383 | |
| journal lastpage | 1389 | |
| identifier eissn | 1528-8935 | |
| keywords | Dampers | |
| keywords | Design | |
| keywords | Rotors | |
| keywords | Bearings | |
| keywords | Computer software | |
| keywords | Stiffness | |
| keywords | Lubrication theory | |
| keywords | Damping | |
| keywords | Force | |
| keywords | Motion AND Stress | |
| tree | Journal of Manufacturing Science and Engineering:;1975:;volume( 097 ):;issue: 004 | |
| contenttype | Fulltext | |