Simulating Seismic Response of Cantilever Retaining Walls

Abstract

Many failures of retaining walls during earthquakes occurred near waterfront. A reasonably accurate evaluation of earthquake effects under such circumstance requires proven analytical models for dynamic earth pressure, hydrodynamic pressure, and excess pore pressure. However, such analytical procedures, especially for excess pore pressure, are not available and hence comprehensive numerical procedures are needed. This paper presents the results of a finite-element simulation of a flexible, cantilever retaining wall with dry and saturated backfill under earthquake loading, and the results are compared with that of a centrifuge test. It is found that bending moments in the wall increased significantly during earthquakes both when backfill is dry or saturated. After base shaking, the residual moment on the wall was also significantly higher than the moment under static loading. Liquefaction of backfill soil contributed to the failure of the wall, which had large outward movement and uneven subsidence in the backfill. The numerical simulation was able to model quite well the main characteristics of acceleration, bending moment, displacement, and excess pore pressure recorded in the centrifuge test in most cases with the simulation for dry backfill slightly better than that for saturated backfill.