Three-Dimensional Multi-Morphology TPMS-Based Microchannel Design Method for Conformal Cooling in Injection Molding

Abstract

Triply periodic minimal surface (TPMS) possesses diverse morphological characteristics, such as pore sizes, porosity, and structural types. Integrating TPMS-based microchannels into micro-cellular cooling structures is advantageous for designing and controlling fluid characteristics within mold cooling channels. However, it is still difficult to design multi-morphology TPMS-based cooling microchannels that conform to the external shapes of injection molds. This work proposes a 3D multi-morphology TPMS-based design method that transforms 3D constraints into a combination of 2D constraints. First, a beta growth algorithm based on closed-loop constraints is proposed to transition different morphologies smoothly on the plane. Subsequently, a transition optimization algorithm along the normal direction of the plane is introduced to smoothly transition multi-morphology TPMS-based microchannels in all directions. With this layered approach, multi-morphology microchannels can be obtained with first-order geometric continuity under complex shape constraints. Finally, several TPMS-based conformal cooling structures are designed for an automotive hood cover. The results of finite element simulations show that the cooling structures generated by the proposed method have a better cooling effect than the conformal channels. It can be concluded that multi-morphology TPMS-based structures perform better by contrast with conformal channels as the average temperature of the cooling surface decreases by 8.48 K, and the standard deviation of temperature distribution decreases by 24.65%.