Browsing Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture by Title
Now showing items 1-20 of 32
-
A Deep-Learning-Based LSTM Approach for Multiphase Rate Transient Analysis in Tight and Ultratight Reservoir
(The American Society of Mechanical Engineers (ASME), 2025)This paper developed a long short-term memory (LSTM)-based deep learning for rate transient analysis in tight and ultratight (shale) reservoirs and proposed a workflow to quantitatively evaluate fracture parameters. The ... -
A New Five-step Method for Advanced Evaluation of Shale Gas Formations and a Field Case Study of Marcellus Shale
(The American Society of Mechanical Engineers (ASME), 2025)This paper presents a new five-step method to evaluate shale gas formations with intricate pore networks. The method overcomes challenges posed by traditional workflows through an improved workflow and a new unconventional ... -
A Prediction Method of Oil Recovery for Hot Water Chemical Flooding in Heavy Oil Reservoirs: Semi-Analytical Stream Tube Model
(The American Society of Mechanical Engineers (ASME), 2024)Chemical agents (polymer and surfactant) assisted hot water flooding is an effective means of enhancing oil recovery in heterogeneous and heavy oil reservoirs. The rapid prediction of oil recovery through hot water chemical ... -
A Semi-Analytical Mathematical Model of Off-Center Multi-Stage Fractured Horizontal Well in Circle Bi-Zonal Gas Reservoir
(The American Society of Mechanical Engineers (ASME), 2024)Reservoir permeability and stress heterogeneous distribution lead to different hydraulic fracture lengths and angles. Gas reservoirs' heterogeneous characteristics lead that well is not the center of the circle high-permeability ... -
Analysis of Carbon Dioxide Injectivity and Dynamic Storage Capacity in Shale Reservoirs
(The American Society of Mechanical Engineers (ASME), 2024)Carbon dioxide could be stored in unconventional shale reservoirs in a supercritical state due to available pore volume, infrastructure, and injectivity. However, there is a lack of knowledge about the injectivity and ... -
Analysis of Production Decline Type Curves Considering Water Influx in Naturally Fractured Gas Reservoirs
(The American Society of Mechanical Engineers (ASME), 2025)In the development of fractured gas reservoirs with edge and bottom water, water invasion is a pervasive issue. However, most production decline analysis models focus on primary depletion with closed boundaries rather than ... -
Comprehensive Evaluation of Microscopic Movability and Macroscopic Productivity of Continental Shale Reservoir
(The American Society of Mechanical Engineers (ASME), 2024)Continental shale oil is diversified, differentiated, and complex. It has disadvantages such as low production and inferior development benefits. Given this, the movability and productivity of shale oil were proposed in ... -
Distribution of Flow Characteristics and Productivity Evaluation of Herringbone Wells in Bottom-Water Reservoirs
(The American Society of Mechanical Engineers (ASME), 2024)With the characteristics of large drainage area and low drilling cost, the herringbone wells are becoming a significant way to boost the well production, improve the dynamic flow profile, delay the coning of bottom water, ... -
Effects of Fines Migration and Reservoir Heterogeneity on Well Productivity: Analytical Model and Field Cases
(The American Society of Mechanical Engineers (ASME), 2024)Formation damage due to fines migration after water breakthrough during oil and gas production results in significant well productivity decline. A recent study derived an analytical model for fines migration during commingled ... -
Enrichment of Chlorophyta Growth Via Cerium Oxide and Utilized for Hydrogen Production Via a Hydrothermal Gasification Process
(The American Society of Mechanical Engineers (ASME), 2024)The growing interest in alternative fuels stems from the need to address energy security and economic challenges. Hydrogen fuel is considered a promising solution due to its versatility, efficiency, and potential for zero ... -
Experimental and Theoretical Investigation of Thermal Decomposition Solvents for TOAHCl1
(The American Society of Mechanical Engineers (ASME), 2025)In the pursuit of optimizing the reaction–extraction–crystallization-coupled mineralization process for carbon capture, utilization, and storage (CCUS) technology, this study presents a pioneering investigation into the ... -
Experimental Investigation on Fracture Propagation in Heat-Treated Granite Samples During True Triaxial Temporary Plugging and Diversion Fracturing
(The American Society of Mechanical Engineers (ASME), 2025)- -
Experimental Study of Sand Wear and Performance Deterioration of Mixed-Type Electrical Submersible Pumps
(The American Society of Mechanical Engineers (ASME), 2025)Electrical submersible pumps (ESPs) are widely used in the oil and gas industry to provide external energy to producing wells when the natural drive of the reservoir is insufficient. However, ESPs are susceptible to the ... -
Fast and Reliable History Matching of Channel Reservoirs Using Initial Models Selected by Streamline and Deep Learning
(The American Society of Mechanical Engineers (ASME), 2024)Ensemble-based methods involve using multiple models for model calibration to correct initial models based on observed data. The assimilated ensemble models allow probabilistic analysis of future production behaviors. It ... -
Identification Method of Remaining Oil Potential Area Based on Deep Learning
(The American Society of Mechanical Engineers (ASME), 2025)Efficiently classifying potential areas of remaining oil is essential for enhancing the recovery in high water cut reservoir. The distribution of remaining oil is complex and challenging to mobilize due to temporal evolution ... -
Impact of Production Strategy on Production Forecasting, Energy Demand, and Carbon Emissions: Typical Case Study of the Brazilian Presalt
(The American Society of Mechanical Engineers (ASME), 2025)This study evaluates how the production strategy influences the main decision-making indicators in the development of the production of a Brazilian presalt field, considering reservoir and production system models integrated ... -
In Situ Analysis of Flow and Morphology Properties at the Pore Scale During CO2-Enhanced Oil Recovery
(The American Society of Mechanical Engineers (ASME), 2025)Carbon dioxide-enhanced oil recovery (CO2-EOR) is an essential technique to improve oil recovery while reducing greenhouse gas emissions. However, the pore-scale flow dynamics and morphological characteristics during the ... -
Induced Stress Interference of Hydraulic Fracturing in Shale Reservoir
(The American Society of Mechanical Engineers (ASME), 2025)Multistage fracturing in horizontal wells has been widely applied in shale reservoirs over the past decades, contributing to substantial productivity gains through the generation of a complex fracture network. The optimal ... -
Mechanical Behavior of Casing–Cement Interface Debonding Failure and Safety Verification Analysis Based on Peridynamics
(The American Society of Mechanical Engineers (ASME), 2025)Frequent occurrences of wellhead sinking highlight the inadequacy of cement's supporting force for the casing, which results in the debonding of the casing–cement interface. The interface debonding leads to the failure of ... -
Numerical and Optimization Studies on Reactivity Controlled Compression Ignition Engine With Hydrogen and Split Injections
(The American Society of Mechanical Engineers (ASME), 2025)Effective abatement of harmful tail-pipe emissions from fossil fuel run engines is achieved through low-temperature combustion strategies; the reactivity controlled compression ignition (RCCI) mode of operation has been ...