Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy
Browse by
EISSN 2997-0261|ISSN 2997-0253|Disc:The Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy disseminates technical information – peer-reviewed scholarly work, research papers, technical briefs, feature articles and authoritative review articles – of permanent interest to the journal’s readership. Emphasis is given to conversion of any form of chemical, thermal and mechanical energies, including various electricity generation technologies, refrigeration/heat pump and cryogenic processes, energy storage, and wide spectrum of technologies associated with renewables. Evaluation of the systems using methods of thermodynamics, economics and environmental sciences, including sustainability aspects, and policy assessments. Application of optimization methods. A small number of published papers describe case histories, review advanced technologies or describe a new methodology/industrial process, applications of machine learning and big data analysis. Discussion papers addressing energy policy or regulatory issues that affect energy resources and energy demand and supply are also published|Priority:6|Publisher:American Society of Mechanical Engineers|
Recent Submissions
-
Comparison of Pea Coal Combustion in a Novel Burner With Separated Primary and Secondary Air With Combustion in a Typical Retort Burner
(The American Society of Mechanical Engineers (ASME), 2025)Pea coal remains a significant fuel source for heating residential and public buildings, particularly in areas without access to centralized heating or gas networks. Recently, there has been growing interest in upgrading ... -
Analysis of Absorption-Compression Hybrid Refrigeration Systems for Using Low-Temperature Heat Sources
(The American Society of Mechanical Engineers (ASME), 2025)The main objective of this study is to explore and compare the energy and exergy performance of main configurations of nonhybrid (conventional), hybrid (with low- and high-pressure-side booster compressor), and absorption ... -
Study on Leak Detection of the Vehicle Fuel Evaporation System Based on the Positive Pressure Method
(The American Society of Mechanical Engineers (ASME), 2025)- -
Optimized Multiclass Fault Detection in Solar Photovoltaic Modules Using TinySqueezeNet With Minimal Computational Overhead
(The American Society of Mechanical Engineers (ASME), 2025)- -
The Use of Recycled Catalyst for the Molten Carbonate Fuel Cell Fueled by Methane
(The American Society of Mechanical Engineers (ASME), 2025)This article describes an experimental study and mathematical modeling of a molten carbonate fuel cell (MCFC) powered by methane thanks to the use of a recycled catalyst in the anode channel of the cell. The catalyst was ... -
Impact of Metal Oxide Nanoparticles in Waste Plastic Oil on Diesel Engine Performance, Combustion, Emissions, and Tribology
(The American Society of Mechanical Engineers (ASME), 2025)- -
Numerical and Experimental Studies of Fluidized Bed Reactors for Adsorption Cooling and Desalination Systems
(The American Society of Mechanical Engineers (ASME), 2025)Fluidization is widely utilized in various industrial processes due to its advantages, such as efficient material mixing, uniform temperature distribution, and enhanced heat and mass transfer between solids and the fluid. ... -
Performance Analysis of Pinewood, Bamboo, and Plywood Gasification in a Fluidized Bed Gasifier
(The American Society of Mechanical Engineers (ASME), 2025)In emerging economies such as India, there is an increasing need for energy, leading to an enhanced reliance on fossil fuels. To reduce global warming caused by fossil fuel consumption, gasification must be promoted to ... -
Optimization of Methanol Cracking Gas Blending Ratios and Diesel Injection Timing for Combustion and Emissions Control in Marine Engines
(The American Society of Mechanical Engineers (ASME), 2025)To improve the thermal efficiency of marine engines and reduce NOX emission, the heat of waste gas is recycled to heat cracking methanol and the diesel micro-injection ignition method. The effects of methanol cracking gas ... -
Hybrid Algorithm Approach for Driving Distribution Static Compensator in Multiple Renewable Energy Systems
(The American Society of Mechanical Engineers (ASME), 2025)There has been a recent drive toward integration of renewable energy resources into the main grid to improve the environmental aspects of the energy generation sector. The integration brings about stability and quality ... -
Computational Analysis on the Effect of Methanol Energy Ratio on the Spray and Combustion Pattern of a Dual-Fuel Compression Ignition Engine
(The American Society of Mechanical Engineers (ASME), 2025)Methanol is gaining significant attention for its potential in green energy production and its easy handling and storage. Using methanol in conjunction with diesel, under dual operation, does not require significant hardware ... -
The Study on the Working Characteristics of Gaseous Premixing in a Kerosene/Air-Rotating Detonation Combustor
(The American Society of Mechanical Engineers (ASME), 2025)To enable stable performance in a rotating detonation combustor (RDC) operating with aviation fuel and air mixtures, this study develops a novel RDC configuration for hydrocarbon/oxidizer systems. The experimental investigation ... -
Numerical Investigation of Ammonia/n-Heptane Dual-Fuel Spray Flames Using Large Eddy Simulations
(The American Society of Mechanical Engineers (ASME), 2025)Diesel engines are extensively used in heavy-duty transportation, power generation, and marine vehicles due to their superior thermal efficiency and extended high-load operability compared to spark ignition (SI) engines. ... -
Investigation of the Potential of Air-Source and Hybrid-Source Heat Pumps in Cold Climates
(The American Society of Mechanical Engineers (ASME), 2025)This study investigates the performance of air and hybrid-source heat pumps, particularly in cold climates where freezing can compromise efficiency. The problem statements to solve during the research are investigating the ... -
Multi-Objective Prediction of the Energy Consumption of the Steam Turbine System Based on the 660 MW Ultra-Supercritical Coal-Fired Unit
(The American Society of Mechanical Engineers (ASME), 2025)This study is aimed at the issue of energy waste resulting from significant fluctuations in the energy consumption of the steam turbine system under the flexible peaking demands of coal-fired units. To accurately predict ... -
Optimizing Bifacial Solar Modules for Enhanced Energy Capture on Cloudy Days
(The American Society of Mechanical Engineers (ASME), 2025)To improve the utilization of solar irradiance by a bifacial photovoltaic (PV) flat single-axis tracking system under complex weather conditions, a dynamic optimization model for bifacial PV modules, a hybrid tracking ... -
Optimization of Phase Change Material/Nano-Additive Heat Exchangers With Innovative Tree-Shaped Fin Designs for Enhanced Thermal Storage
(The American Society of Mechanical Engineers (ASME), 2025)The use of phase change materials (PCMs) has gained prominence due to their exceptional thermal energy storage capabilities, aiding in CO2 emission reduction and promoting sustainable energy. This study investigates the ... -
Modeling Lithium Adsorption in Column Chromatography Applications With Granulated Li/Al-Layered Double Hydroxide Chlorides: A Lattice Boltzmann Modeling Approach
(The American Society of Mechanical Engineers (ASME), 2025)Given the crucial role of lithium (Li) in clean energy transition through effective decarbonization of various energy sectors, enhancing and diversifying the source of Li is regarded as an urgent priority. Producing Li ... -
Effects of Atomic Layer Deposition-Alumina on Moisture Resistance Properties of Yttria-Stabilized Zirconia Thermal Barrier Coatings in Hydrogen Enriched Flame
(The American Society of Mechanical Engineers (ASME), 2025)Current thermal barrier coatings (TBCs), typically made of yttria-stabilized zirconia (YSZ), face challenges in the high-moisture, high-temperature environment during the combustion of hydrogen-enriched fuels. This is ... -
Combustion Characteristics of Premixed Ammonia/Methane/Air Blends as an Alternative Fuel in a Swirl-Stabilized Gas Turbine Can Combustor Sustained Using a Pilot Flame
(The American Society of Mechanical Engineers (ASME), 2025)The present research work investigated the combustion characteristics of lean premixed ammonia/methane/air flames in an atmospheric pressure swirl-stabilized gas turbine can combustor. The study focused on characteristics ...