Integrated Thermal Management System Concept With Combined Jet Plate, High Porosity Aluminum Foam, and Target Plate for Enhanced Heat Transfer

Abstract

An experimental investigation was carried out on high porosity metal foams subjected to array jet impingement with an objective to develop enhanced heat transfer configurations. In this study, we propose an integrated thermal management system (TMS) aimed toward leveraging the conjugate heat transfer capabilities of target plate, metal foam, and the jet plate—all made from aluminum and assembled such that a proper contact between them can be established. Steady-state heat transfer experiments were carried out for 10 and 20 pores per inch (PPI) aluminum foams of 0.93 porosity. Both metal foams were 12.7-mm thick. The normalized jet-to-jet spacing was varied from 2 to 12 times the jet diameter, while the jet diameter was fixed. The ratio of the jet plate thickness and jet diameter (nozzle aspect ratio) was 6.35, which ensured proper development of jets inside the nozzles. Experiments were conducted over a wide range of Reynolds number (based on jet diameter) varied from 100 to 5000. The obtained convective heat transfer coefficient for different configuration was evaluated in context with pressure drop. The analysis of experimental results reveal that large open area ratio jets combined with high porosity metal foams provide highly efficient and high-performance cooling for the investigated range of Reynolds numbers.