| description abstract | In this paper, a systematic numerical study of pool boiling heat transfer on a mixed wettability heated surface is done using the lattice Boltzmann method (LBM) with a multiple relaxation time (MRT)-based collision operator. The effect of the design parameters, viz, size of the hydrophobic patch (D), spacing between hydrophobic patches (L), number of hydrophobic patches (N), and uneven-sized patches, on pool boiling was studied and results are explained through detailed analysis of bubble nucleation, growth, coalescence, and departure from the heated surface. The results show that mixed wettability surfaces with strategically sized and positioned hydrophobic patches on a hydrophilic surface can result in high heat flux for pool boiling across the entire range of surface superheat or Jacob number (Ja) by combining the advantages of hydrophobic surface in nucleate boiling and hydrophilic surface in transition and film boiling. Further, the mixed wettability surface can delay the onset of film boiling compared to a pure or superhydrophilic surface thereby resulting in higher critical heat flux (CHF). A hydrophobic to total surface area ratio of 30–40% was found to be optimal for all ranges of surface superheat or Jacob number (Ja), which agrees well with the experimental result of 38.46% reported by Motezakker et al. (2019, “Optimum Ratio of Hydrophobic to Hydrophilic Areas of Biphilic Surfaces in Thermal Fluid Systems Involving Boiling,” Int. J. Heat Mass Transfer, 135, pp. 164–174). | |
