Thermodynamic Analysis of Comprehensive Performance of Carbon Dioxide(R744) and Its Mixture With Ethane(R170) Used in Refrigeration and Heating System at Low Evaporation TemperatureSource: ASME Open Journal of Engineering:;2024:;volume( 003 ):;issue: 00::page 31003-1DOI: 10.1115/1.4064403Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, the system performance of R744 and R744/R170 mixed refrigerants used in a single-stage compression transcritical cycle at low evaporation temperature was studied by simulation method, and the effect of evaporation temperature, outlet temperature of gas cooler, R170 ratio on coefficient of performance (COP), discharge temperature, optimal pressure, and compression ratio were analyzed. The results show that Popt increases and decreases with the increase of outlet temperature and evaporation temperature of gas cooler and increases first and then decreases with the increase of R170 proportion. In the heating system, the maximum and minimum Popt of R744/R170 (25/75) were 1.35 MPa, 3.6 MPa, and 2.6 MPa and 1.23 MPa, 2.93 MPa, and 1.87 MPa lower than that of R170 (0%, 22.4%, and 50%); compared to pure R744, the system pressure of the mixed R744/R170 is lower. The COPe and COPh increase with the increase of evaporation temperature and decrease with the increase of outlet temperature of the gas cooler. With the increase of R170 proportion, they first decrease and then increase; the maximum COPe and COPh of R744 were 22.4%, 29.6%, and 21.2% and 10.3%, 13.8%, and 10.8% higher than those of R170 at 22.4%, 50% and 75%, respectively.
|
Collections
Show full item record
contributor author | Sun, Dahan | |
contributor author | Liu, Zhongyan | |
contributor author | Zhang, Hao | |
contributor author | Zhang, Xin | |
contributor author | Qin, Jiang | |
date accessioned | 2024-12-24T18:47:55Z | |
date available | 2024-12-24T18:47:55Z | |
date copyright | 1/18/2024 12:00:00 AM | |
date issued | 2024 | |
identifier issn | 2770-3495 | |
identifier other | aoje_3_031003.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4302761 | |
description abstract | In this paper, the system performance of R744 and R744/R170 mixed refrigerants used in a single-stage compression transcritical cycle at low evaporation temperature was studied by simulation method, and the effect of evaporation temperature, outlet temperature of gas cooler, R170 ratio on coefficient of performance (COP), discharge temperature, optimal pressure, and compression ratio were analyzed. The results show that Popt increases and decreases with the increase of outlet temperature and evaporation temperature of gas cooler and increases first and then decreases with the increase of R170 proportion. In the heating system, the maximum and minimum Popt of R744/R170 (25/75) were 1.35 MPa, 3.6 MPa, and 2.6 MPa and 1.23 MPa, 2.93 MPa, and 1.87 MPa lower than that of R170 (0%, 22.4%, and 50%); compared to pure R744, the system pressure of the mixed R744/R170 is lower. The COPe and COPh increase with the increase of evaporation temperature and decrease with the increase of outlet temperature of the gas cooler. With the increase of R170 proportion, they first decrease and then increase; the maximum COPe and COPh of R744 were 22.4%, 29.6%, and 21.2% and 10.3%, 13.8%, and 10.8% higher than those of R170 at 22.4%, 50% and 75%, respectively. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Thermodynamic Analysis of Comprehensive Performance of Carbon Dioxide(R744) and Its Mixture With Ethane(R170) Used in Refrigeration and Heating System at Low Evaporation Temperature | |
type | Journal Paper | |
journal volume | 3 | |
journal title | ASME Open Journal of Engineering | |
identifier doi | 10.1115/1.4064403 | |
journal fristpage | 31003-1 | |
journal lastpage | 31003-15 | |
page | 15 | |
tree | ASME Open Journal of Engineering:;2024:;volume( 003 ):;issue: 00 | |
contenttype | Fulltext |