YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Materials in Civil Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Materials in Civil Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Characterization of Cement-Polymer-Treated Soils under Repeated Loading

    Source: Journal of Materials in Civil Engineering:;2024:;Volume ( 036 ):;issue: 004::page 04024036-1
    Author:
    Prince Kumar
    ,
    Anand J. Puppala
    ,
    Surya Sarat Chandra Congress
    ,
    Jeb S. Tingle
    DOI: 10.1061/JMCEE7.MTENG-16394
    Publisher: ASCE
    Abstract: The mechanistic-empirical pavement design guide (M-EPDG) recommends the use of resilient modulus (MR) for characterization of subgrade soils. Subgrade soils may not always have enough strength and stiffness to support the pavement structure. Therefore, a certain type of soil improvement method using cement, lime, or other stabilization techniques is often needed to enhance the strength and stiffness properties of weak subgrade soils. The cement-stabilized soils show brittle behavior under compression loading, which can induce cracking in overlying pavement layers. In general, polymer-treated soils show a semiductile or ductile behavior. It is important to look for combined cement and polymer treatments to address brittle behavior issues as well as moisture susceptibility while maintaining strength and moduli properties. A research study was conducted to understand the strength, resilient, and ductile behaviors of sandy soils treated with cement and a combination of cement and vinyl acetate ethylene (VAE) copolymer. Engineering tests such as unconfined compressive strength (UCS) and resilient modulus tests were conducted on both control and treated soil specimens cured for 7 days. Tests were conducted on specimens before and after immersing in water bath for 4 h to investigate the moisture susceptibility. In these tests, an increase in UCS was observed after cement and cement-VAE treatments as compared to control soil specimens. Results showed that cement-VAE-treated soils exhibited an increase in the axial strain at failure, indicating the semiductile behavior compared to cement-treated specimens. An improvement in the resilient moduli was observed after treatments. Subsequently, two of three-parameter models were used to analyze resilient modulus formulations with stress conditions and determined the regression constants. In conclusion, the study revealed that the use of VAE copolymer improved the stress-strain responses of cement-treated soils and imparted closer to the semiductile behavior, which will reduce cracking in overlying pavement structures.
    • Download: (3.771Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Price: 5000 Rial
    • Statistics

      Characterization of Cement-Polymer-Treated Soils under Repeated Loading

    URI
    http://yetl.yabesh.ir/yetl1/handle/yetl/4297879
    Collections
    • Journal of Materials in Civil Engineering

    Show full item record

    contributor authorPrince Kumar
    contributor authorAnand J. Puppala
    contributor authorSurya Sarat Chandra Congress
    contributor authorJeb S. Tingle
    date accessioned2024-04-27T22:56:21Z
    date available2024-04-27T22:56:21Z
    date issued2024/04/01
    identifier other10.1061-JMCEE7.MTENG-16394.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297879
    description abstractThe mechanistic-empirical pavement design guide (M-EPDG) recommends the use of resilient modulus (MR) for characterization of subgrade soils. Subgrade soils may not always have enough strength and stiffness to support the pavement structure. Therefore, a certain type of soil improvement method using cement, lime, or other stabilization techniques is often needed to enhance the strength and stiffness properties of weak subgrade soils. The cement-stabilized soils show brittle behavior under compression loading, which can induce cracking in overlying pavement layers. In general, polymer-treated soils show a semiductile or ductile behavior. It is important to look for combined cement and polymer treatments to address brittle behavior issues as well as moisture susceptibility while maintaining strength and moduli properties. A research study was conducted to understand the strength, resilient, and ductile behaviors of sandy soils treated with cement and a combination of cement and vinyl acetate ethylene (VAE) copolymer. Engineering tests such as unconfined compressive strength (UCS) and resilient modulus tests were conducted on both control and treated soil specimens cured for 7 days. Tests were conducted on specimens before and after immersing in water bath for 4 h to investigate the moisture susceptibility. In these tests, an increase in UCS was observed after cement and cement-VAE treatments as compared to control soil specimens. Results showed that cement-VAE-treated soils exhibited an increase in the axial strain at failure, indicating the semiductile behavior compared to cement-treated specimens. An improvement in the resilient moduli was observed after treatments. Subsequently, two of three-parameter models were used to analyze resilient modulus formulations with stress conditions and determined the regression constants. In conclusion, the study revealed that the use of VAE copolymer improved the stress-strain responses of cement-treated soils and imparted closer to the semiductile behavior, which will reduce cracking in overlying pavement structures.
    publisherASCE
    titleCharacterization of Cement-Polymer-Treated Soils under Repeated Loading
    typeJournal Article
    journal volume36
    journal issue4
    journal titleJournal of Materials in Civil Engineering
    identifier doi10.1061/JMCEE7.MTENG-16394
    journal fristpage04024036-1
    journal lastpage04024036-13
    page13
    treeJournal of Materials in Civil Engineering:;2024:;Volume ( 036 ):;issue: 004
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian