Show simple item record

contributor authorPrince Kumar
contributor authorAnand J. Puppala
contributor authorSurya Sarat Chandra Congress
contributor authorJeb S. Tingle
date accessioned2024-04-27T22:56:21Z
date available2024-04-27T22:56:21Z
date issued2024/04/01
identifier other10.1061-JMCEE7.MTENG-16394.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4297879
description abstractThe mechanistic-empirical pavement design guide (M-EPDG) recommends the use of resilient modulus (MR) for characterization of subgrade soils. Subgrade soils may not always have enough strength and stiffness to support the pavement structure. Therefore, a certain type of soil improvement method using cement, lime, or other stabilization techniques is often needed to enhance the strength and stiffness properties of weak subgrade soils. The cement-stabilized soils show brittle behavior under compression loading, which can induce cracking in overlying pavement layers. In general, polymer-treated soils show a semiductile or ductile behavior. It is important to look for combined cement and polymer treatments to address brittle behavior issues as well as moisture susceptibility while maintaining strength and moduli properties. A research study was conducted to understand the strength, resilient, and ductile behaviors of sandy soils treated with cement and a combination of cement and vinyl acetate ethylene (VAE) copolymer. Engineering tests such as unconfined compressive strength (UCS) and resilient modulus tests were conducted on both control and treated soil specimens cured for 7 days. Tests were conducted on specimens before and after immersing in water bath for 4 h to investigate the moisture susceptibility. In these tests, an increase in UCS was observed after cement and cement-VAE treatments as compared to control soil specimens. Results showed that cement-VAE-treated soils exhibited an increase in the axial strain at failure, indicating the semiductile behavior compared to cement-treated specimens. An improvement in the resilient moduli was observed after treatments. Subsequently, two of three-parameter models were used to analyze resilient modulus formulations with stress conditions and determined the regression constants. In conclusion, the study revealed that the use of VAE copolymer improved the stress-strain responses of cement-treated soils and imparted closer to the semiductile behavior, which will reduce cracking in overlying pavement structures.
publisherASCE
titleCharacterization of Cement-Polymer-Treated Soils under Repeated Loading
typeJournal Article
journal volume36
journal issue4
journal titleJournal of Materials in Civil Engineering
identifier doi10.1061/JMCEE7.MTENG-16394
journal fristpage04024036-1
journal lastpage04024036-13
page13
treeJournal of Materials in Civil Engineering:;2024:;Volume ( 036 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record