Application of a Distributed Element Roughness Model to Additively Manufactured Internal Cooling Channels

Abstract

Design for cooling effectiveness in turbine blades relies on accurate models for dynamic losses and heat transfer of internal cooling passages. Metal additive manufacturing (AM) has expanded the design space for these configurations, but can give rise to large-scale roughness features. The range of roughness length scales in these systems makes morphology resolved computational fluid dynamics (CFD) impractical. However, volumetric roughness models can be leveraged, as they have computational costs orders of magnitude lower. In this work, a discrete element roughness model (DERM), based on the double-averaged Navier–Stokes equations, is presented and applied to additively manufactured rough channels, representative of gas turbine blade cooling passages. Unique to this formulation of DERM is a generalized sheltering-based treatment of drag, a two-layer model for spatially averaged Reynolds stresses, and explicit treatment of dispersion. Six different AM rough surface channel configurations are studied, with roughness trough to peak sizes ranging from 15% to 60% nominal channel passage half-width, and the roughness Reynolds number ranges from Rek = 60 to 300. DERM predictions for spatially and temporally averaged mean flow quantities are compared to previously reported direct numerical simulation results. Good agreement in the mean velocity profiles, stress balances, and drag partitions are observed. While DERM models are typically calibrated to specific deterministic roughness morphologies at comparatively small roughness Reynolds numbers, the present more generalized DERM formulation has wider applicability. Here, it is demonstrated that the model can accommodate random roughness of large scale, typical of AM.