contributor author | Liu, Han | |
contributor author | Laflamme, Simon | |
contributor author | Morgan, Carter | |
contributor author | Nelson, Matthew | |
contributor author | Bentil, Sarah A. | |
date accessioned | 2023-11-29T19:32:23Z | |
date available | 2023-11-29T19:32:23Z | |
date copyright | 10/7/2022 12:00:00 AM | |
date issued | 10/7/2022 12:00:00 AM | |
date issued | 2022-10-07 | |
identifier issn | 2572-3901 | |
identifier other | nde_6_1_011005.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4294846 | |
description abstract | Additive manufacturing (AM) parts retain a certain degree of individuality and could suffer from a combination of different defect types, and therefore the nondestructive evaluation on AM parts remains a challenging task. Engineering non-contact and nondestructive real-time inspection and in situ quality assurance of AM parts would be a net improvement compared to current quality control methods that are conducted post-production. Here, the authors propose to combine the use of a laser vibrometer with a compression-driven shock tube to assess the quality of AM parts through the evaluation of the vibration spectra of the part. An AM of a cylindrical part was selected for the study, along with different defect types and sizes. These defects include internal voids of different sizes at different locations, local changes in thickness (infill), and local changes in melting temperatures. A numerical model was created and validated using experimental data to conduct model-assisted probability of detection (MAPOD). Results were analyzed by evaluating correlation matrices between different models. Results showed that vibration spectra induced by a shock wave were sensitive to different types and sizes of defects under the studied geometry. The defect index yielded an approximately linear relationship with respect to defect void severity. MAPOD curve studies revealed a minimum detectable void defect of 0.039% of the AM part’s volume. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Real-Time Nondestructive Evaluation of Additive Manufacturing Using a Laser Vibrometer and Shock Tube | |
type | Journal Paper | |
journal volume | 6 | |
journal issue | 1 | |
journal title | Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems | |
identifier doi | 10.1115/1.4055383 | |
journal fristpage | 11005-1 | |
journal lastpage | 11005-13 | |
page | 13 | |
tree | Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems:;2022:;volume( 006 ):;issue: 001 | |
contenttype | Fulltext | |