Occupant Injury and Response on Oblique-Facing Aircraft Seats: A Computational StudySource: Journal of Biomechanical Engineering:;2022:;volume( 145 ):;issue: 002::page 21003-1Author:Somasundaram, Karthik
,
Humm, John R.
,
Khandelwal, Prashant
,
Umale, Sagar
,
Moorcroft, David M.
,
Pintar, Frank A.
DOI: 10.1115/1.4055511Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Increased interest in the airline industry to enhance occupant comfort and maximize seating density has prompted the design and installation of obliquely mounted seats in aircraft. Previous oblique whole-body sled tests demonstrated multiple failures, chiefly distraction-associated spinal injuries under oblique impacts. The present computational study was performed with the rationale to examine how oblique loading induces component level responses and associated injury occurrence. The age-specific human body model (HBM) was simulated for two oblique seating conditions (with and without an armrest). The boundary conditions consisted of a 16 g standard aviation crash pulse, 45 deg seat orientation, and with restrained pelvis and lower extremities. The overall biofidelity rating for both conditions ranged from 0.5 to 0.7. The validated models were then used to investigate the influence of pulse intensity and seat orientation by varying the pulse from 16 g to 8 g and seat orientation from 0 deg to 90 deg. A total of 12 parametric simulations were performed. The pulse intensity simulations suggest that the HBM could tolerate 11.2 g without lumbar spine failure, while the possibility of cervical spine failure reduced with the pulse magnitude <9.6 g pulse. The seat orientation study demonstrated that for all seat angles the HBM predicted failure in the cervical and lumbar regions at 16 g; however, the contribution of the tensile load and lateral and flexion moments varied with respect to the change in seat angle. These preliminary outcomes are anticipated to assist in formulating safety standards and in designing countermeasures for oblique seating configurations.
|
Collections
Show full item record
contributor author | Somasundaram, Karthik | |
contributor author | Humm, John R. | |
contributor author | Khandelwal, Prashant | |
contributor author | Umale, Sagar | |
contributor author | Moorcroft, David M. | |
contributor author | Pintar, Frank A. | |
date accessioned | 2023-08-16T18:29:01Z | |
date available | 2023-08-16T18:29:01Z | |
date copyright | 10/6/2022 12:00:00 AM | |
date issued | 2022 | |
identifier issn | 0148-0731 | |
identifier other | bio_145_02_021003.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4292022 | |
description abstract | Increased interest in the airline industry to enhance occupant comfort and maximize seating density has prompted the design and installation of obliquely mounted seats in aircraft. Previous oblique whole-body sled tests demonstrated multiple failures, chiefly distraction-associated spinal injuries under oblique impacts. The present computational study was performed with the rationale to examine how oblique loading induces component level responses and associated injury occurrence. The age-specific human body model (HBM) was simulated for two oblique seating conditions (with and without an armrest). The boundary conditions consisted of a 16 g standard aviation crash pulse, 45 deg seat orientation, and with restrained pelvis and lower extremities. The overall biofidelity rating for both conditions ranged from 0.5 to 0.7. The validated models were then used to investigate the influence of pulse intensity and seat orientation by varying the pulse from 16 g to 8 g and seat orientation from 0 deg to 90 deg. A total of 12 parametric simulations were performed. The pulse intensity simulations suggest that the HBM could tolerate 11.2 g without lumbar spine failure, while the possibility of cervical spine failure reduced with the pulse magnitude <9.6 g pulse. The seat orientation study demonstrated that for all seat angles the HBM predicted failure in the cervical and lumbar regions at 16 g; however, the contribution of the tensile load and lateral and flexion moments varied with respect to the change in seat angle. These preliminary outcomes are anticipated to assist in formulating safety standards and in designing countermeasures for oblique seating configurations. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Occupant Injury and Response on Oblique-Facing Aircraft Seats: A Computational Study | |
type | Journal Paper | |
journal volume | 145 | |
journal issue | 2 | |
journal title | Journal of Biomechanical Engineering | |
identifier doi | 10.1115/1.4055511 | |
journal fristpage | 21003-1 | |
journal lastpage | 21003-13 | |
page | 13 | |
tree | Journal of Biomechanical Engineering:;2022:;volume( 145 ):;issue: 002 | |
contenttype | Fulltext |