Response of Separated Boundary Layers to Steady and Pulsated Flow Injection

Abstract

A new class of power generation devices that experiences increased losses due to bulk flow separation in segments of their expected in-flight regime is emerging. As such, active flow control becomes increasingly relevant to mitigate these losses and reclaim the entire flight envelope. This study explores the effect of flow injection on transonic flows experiencing bulk separation. Reynolds-averaged Navier–Stokes simulations of a 3D wall-mounted hump at low Reynolds numbers are conducted to assess the response of transonic bulk separation to flow injection. Unsteady simulations are performed to understand the differences between slot and discrete port injection and determine optimum forcing frequencies. Discrete ports require higher pressures to overcome the momentum deficit associated with the smaller injection area relative to the width of the domain. Steady and unsteady injections are found viable strategies for mitigating the extent (or appearance) of bulk separation. Experiments are conducted with discrete injection for a range of Mach and Reynolds numbers. The response of the bulk separation to said injection is evaluated by analyzing both local pressure measurements and schlieren imaging. The study shows that the required pressure of injection is strongly correlated to the length scale of the uncontrolled separation. With large-eddy simulations, the flow separation and frequency content within the separated region can be reasonably predicted. This study aims to take further steps to establish guidelines for applying flow control to the emerging class of power generation devices experiencing losses from bulk separation.