contributor author | Çelik, Acar;Linsky, David;Miezner, Ron;Kleiman, Alex;Leizeronok, Boris;Palman, Michael;Acarer, Sercan;Cukurel, Beni | |
date accessioned | 2023-04-06T12:49:21Z | |
date available | 2023-04-06T12:49:21Z | |
date copyright | 10/7/2022 12:00:00 AM | |
date issued | 2022 | |
identifier issn | 7424795 | |
identifier other | gtp_144_12_121010.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4288570 | |
description abstract | The present research focuses on analyzing the feasibility of manufacturing complex turbomachinery geometries in a preassembled manner through an uninterrupted additive manufacturing process, absent of internal support structures, or postprocessing. In the context of the present COVID19 pandemic, the concept is illustrated by a threedimensional (3D)printable turbinedriven blowertype medical ventilator, which solely relies on availability of highpressure oxygen supply and a conventional plasticprinter. Forming a fully preassembled turbomachine in its final form, the architecture consists of two concentric parts, a static casing with an embedded hydrostatic bearing surrounding a rotating monolithic shell structure that includes a radial turbine mechanically driving a centrifugal blower, which in turn supplies the oxygen enriched air to the lungs of the patient. Although the component level turbomachinery design of the described architecture relies on wellestablished guidelines and computational fluid dynamics methods, this approach has the capability to shift the focus of additive manufacturing methods to design for preassembled turbomachinery systems. Upon finalizing the topology, the geometry is manufactured from polyethylene terephthalate (PETG) plastic using a simple tabletop extrusionbased machine and its performance is evaluated in a test facility. The findings of the experimental campaign are reported in terms of flow and loading coefficients and are compared with simulation results. A good agreement is observed between the two data sets, thereby fully corroborating the applied design approach and the viability of additively manufactured preassembled turbomachines. Eliminating long and costly processes due to presence of numerous parts, different manufacturing methods, logistics of various subcontractors, and complex assembly procedures, the proposed concept has the potential to reduce the cost of a turbomachine to capital equipment depreciation and raw material. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Design Methodology and Concept Demonstration of Preassembled Additively Manufactured Turbomachinery Systems: Case Study of Turbocharger Based Medical Ventilators | |
type | Journal Paper | |
journal volume | 144 | |
journal issue | 12 | |
journal title | Journal of Engineering for Gas Turbines and Power | |
identifier doi | 10.1115/1.4055461 | |
journal fristpage | 121010 | |
journal lastpage | 12101011 | |
page | 11 | |
tree | Journal of Engineering for Gas Turbines and Power:;2022:;volume( 144 ):;issue: 012 | |
contenttype | Fulltext | |