| contributor author | Thakur, Manish Kumar | |
| contributor author | Sarkar, Chiranjit | |
| date accessioned | 2022-05-08T08:43:57Z | |
| date available | 2022-05-08T08:43:57Z | |
| date copyright | 11/9/2021 12:00:00 AM | |
| date issued | 2021 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_144_2_021205.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4284275 | |
| description abstract | In this research article, the working of conventional clutch (CC) filled with magnetorheological (MR) fluid was tested at low compressive load. The flexible permanent magnetic sheet (FMS) controlled the chain strength of MR fluid. A single clutch plate based on FMS was fabricated and tested on the developed test rig. The characteristics of the developed single plate MR clutch (SPMRC) were found by the testing and mathematical calculations. Magnetic circuit analysis presents the magnetic field distribution in the developed MR clutch. The mathematical expression for the torque transmission due to shear and compression is presented. comsol multiphysics 5.3a software is used for the magnetic field simulation at different loading conditions. The temperature distribution in the developed clutch is simulated and experimented. It is observed from the results that the input shaft oscillation reduces more during disengagement in the SPMRC than the CC. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Design and Testing of a Conventional Clutch Filled With Magnetorheological Fluid Activated by a Flexible Permanent Magnet at Low Compressive Load: Numerical Simulation and Experimental Study | |
| type | Journal Paper | |
| journal volume | 144 | |
| journal issue | 2 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4052278 | |
| journal fristpage | 21205-1 | |
| journal lastpage | 21205-14 | |
| page | 14 | |
| tree | Journal of Tribology:;2021:;volume( 144 ):;issue: 002 | |
| contenttype | Fulltext | |
