Unsteady Hemodynamics in Intracranial Aneurysms With Varying Dome OrientationsSource: Journal of Fluids Engineering:;2021:;volume( 143 ):;issue: 006::page 061206-1DOI: 10.1115/1.4049932Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Fluid loading within an intracranial aneurysm is difficult to measure but can be related to the shape of the flow passage. The outcome of excessive loading is a fatal hemorrhage, making it necessary for early diagnosis. However, arterial diseases are asymptomatic and clinical assessment is a challenge. A realistic approach to examining the severity of wall loading is from the morphology of the aneurysm itself. Accordingly, this study compares pulsatile flow (Reynolds number Re = 426, Womersley number Wo = 4.7) in three different intracranial aneurysm geometries. Specifically, the spatio-temporal movement of vortices is followed in high aspect ratio aneurysm models whose domes are inclined along with angles of 0, 45, and 90 deg relative to the plane of the parent artery. The study is based on finite volume simulation of unsteady three-dimensional flow while a limited set of particle image velocimetry experiments have been carried out. Within a pulsatile cycle, an increase in inclination (0–90 deg) is seen to shift the point of impingement from the distal end toward the aneurysmal apex. This change in flow pattern strengthens helicity, drifts vortex cores, enhances spatial displacement of the vortex, and generates skewed Dean's vortices on transverse planes. Patches of wall shear stress and wall pressure shift spatially from the distal end in models of low inclination (0–45 deg) and circumscribe the aneurysmal wall for an inclination angle of 90 deg. Accordingly, it is concluded that high angles of inclination increase rupture risks while lower inclinations are comparatively safe.
|
Collections
Show full item record
contributor author | Usmani, Abdullah Y. | |
contributor author | Muralidhar, K. | |
date accessioned | 2022-02-05T22:16:47Z | |
date available | 2022-02-05T22:16:47Z | |
date copyright | 2/23/2021 12:00:00 AM | |
date issued | 2021 | |
identifier issn | 0098-2202 | |
identifier other | fe_143_06_061206.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4277262 | |
description abstract | Fluid loading within an intracranial aneurysm is difficult to measure but can be related to the shape of the flow passage. The outcome of excessive loading is a fatal hemorrhage, making it necessary for early diagnosis. However, arterial diseases are asymptomatic and clinical assessment is a challenge. A realistic approach to examining the severity of wall loading is from the morphology of the aneurysm itself. Accordingly, this study compares pulsatile flow (Reynolds number Re = 426, Womersley number Wo = 4.7) in three different intracranial aneurysm geometries. Specifically, the spatio-temporal movement of vortices is followed in high aspect ratio aneurysm models whose domes are inclined along with angles of 0, 45, and 90 deg relative to the plane of the parent artery. The study is based on finite volume simulation of unsteady three-dimensional flow while a limited set of particle image velocimetry experiments have been carried out. Within a pulsatile cycle, an increase in inclination (0–90 deg) is seen to shift the point of impingement from the distal end toward the aneurysmal apex. This change in flow pattern strengthens helicity, drifts vortex cores, enhances spatial displacement of the vortex, and generates skewed Dean's vortices on transverse planes. Patches of wall shear stress and wall pressure shift spatially from the distal end in models of low inclination (0–45 deg) and circumscribe the aneurysmal wall for an inclination angle of 90 deg. Accordingly, it is concluded that high angles of inclination increase rupture risks while lower inclinations are comparatively safe. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Unsteady Hemodynamics in Intracranial Aneurysms With Varying Dome Orientations | |
type | Journal Paper | |
journal volume | 143 | |
journal issue | 6 | |
journal title | Journal of Fluids Engineering | |
identifier doi | 10.1115/1.4049932 | |
journal fristpage | 061206-1 | |
journal lastpage | 061206-14 | |
page | 14 | |
tree | Journal of Fluids Engineering:;2021:;volume( 143 ):;issue: 006 | |
contenttype | Fulltext |