contributor author | Pandey, Ashutosh | |
contributor author | Khan, Sajid | |
contributor author | Dekker, Rick | |
contributor author | Shih, Tom I-P. | |
date accessioned | 2022-02-05T22:14:08Z | |
date available | 2022-02-05T22:14:08Z | |
date copyright | 10/26/2020 12:00:00 AM | |
date issued | 2020 | |
identifier issn | 0098-2202 | |
identifier other | fe_143_01_011404.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4277179 | |
description abstract | A computational study based on unsteady Reynolds-averaged Navier–Stokes that resolves the gas–liquid interface was performed to examine the unsteady multiphase flow in a liquid-ring pump as a function of its inlet pressure (10, 40, and 80 kPa) and its impeller's rotational speed (1150, 1450, and 1750 rpm). Results obtained show the shape of the liquid ring to play a critical role in creating the expansion ratio needed to draw air into the pump and the compression ratio needed to expel air out of the pump. The dominant processes that determine the shape of the liquid ring was found to be the centrifugal force from rotation, the acceleration and deceleration due to the difference in pressure at the pump's inlet and outlet, and the eccentricity of the impeller relative to the pump's housing. Results are presented to show how the rotational speed of the impeller and the pressure at the pump's inlet affect the nature of the multiphase flow in the pump as well as the pump's effectiveness in creating a vacuum. The effects of heat transfer on the gas phase during the compression and expansion processes were found to be approximated well by polytropic processes. This computational study was validated by comparing computed with measured volumetric flowrates ingested through the suction port and the torque exerted on the pump's impeller. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Multiphase Flow in a Liquid-Ring Vacuum Pump | |
type | Journal Paper | |
journal volume | 143 | |
journal issue | 1 | |
journal title | Journal of Fluids Engineering | |
identifier doi | 10.1115/1.4047848 | |
journal fristpage | 011404-1 | |
journal lastpage | 011404-13 | |
page | 13 | |
tree | Journal of Fluids Engineering:;2020:;volume( 143 ):;issue: 001 | |
contenttype | Fulltext | |