Show simple item record

contributor authorKlingbeil, Adam
contributor authorHong, Seunghyuck
contributor authorPrimus, Roy J.
date accessioned2022-02-04T22:54:56Z
date available2022-02-04T22:54:56Z
date copyright1/1/2020 12:00:00 AM
date issued2020
identifier issn0742-4795
identifier othergtp_142_01_011006.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4275696
description abstractExperiments were conducted on a large bore, medium speed, single cylinder, diesel engine to investigate operation with substitution ratio of natural gas (NG) varying from 0% to 93% by energy. In a previous study by the same group, these data were used to validate an analytical methodology for predicting performance and emissions under a broad spectrum of energy substitution ratios. For this paper, these experimental data are further analyzed to better understand the performance and combustion behavior under NG substitution ratios of 0%, 60%, and 93%. These results show that by transitioning from diesel-only to 60% dual-fuel (DF) (60% NG substitution ratio), an improvement in the NOx-efficiency trade-off was observed that represented a ∼3% improvement in indicated efficiency at constant NOx. Further, the transition from 60% DF to 93% DF (93% NG substitution ratio) resulted in additional efficiency improvement with a simultaneous reduction in NOx emissions. The data suggest that this improvement can be attributed to the premixed nature of the high substitution ratio case. Furthermore, the results show that high cycle-to-cycle variation was observed for some 93% DF combustion tests. Further analysis, along with diesel injection rate measurements, shows that the observed extreme sensitivity of the combustion event can be attributed to critical parameters such as diesel fuel quantity and injection timing. These results suggest a better understanding of the relative importance of combustion system components and operating conditions in controlling cycle-to-cycle variation of combustion process.
publisherThe American Society of Mechanical Engineers (ASME)
titleInfluence of Diesel Fuel Injection Characteristics on Dual-Fuel Combustion Modes in a Large-Bore, Medium-Speed Engine
typeJournal Paper
journal volume142
journal issue1
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4045344
journal fristpage011006-1
journal lastpage011006-9
page9
treeJournal of Engineering for Gas Turbines and Power:;2020:;volume( 142 ):;issue: 001
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record