| description abstract | Self-healing is a promising way to solve the difficulty in wind turbine blades repair, yet the embedded healing agent may have a disadvantage because of being exposed to outdoor for a long time. Pressurized delivery of the healing agent in real-time when the blade is damaged may be the solution to avoid the disadvantage healing agent. In this paper, the healing agent was pumped to the damaged area by a peristaltic pump, and the healing effect was evaluated by the recovery rate of the residual flexural strength after impact and the image of ultrasonic C-scan. To evaluate the healing effect of different damage degrees, 10 J, 15 J, 20 J, and 25 J impact energies were applied. The fluid tracer test showed that the healing agent could penetrate in the damaged areas after the impact of 15 J, 20 J and 25 J, while the three-point bending test revealed that the healing efficiency was the highest with 20 J (85.2%). The ultrasonic C-scan and optical photos of the sample showed that the images of the healing area were almost consistent with those of the un-impacted area, indicating that the damaged area is healed well. Based on the success of plate samples, the self-healing of the wind turbine blade-scale prototype was then carried out. Twenty-joule impact was exerted on the blade prototype, and the healing agent was pumped to the damaged area using the peristaltic pump similar to the same procedure as that of the plate specimen. Ultrasonic C-scan and optical images of the damaged area showed that the prototype was healed well in comparison with those of the plate specimens, indicating that the application of pressurized delivery of the healing agent system in the self-healing of wind turbine blade prototype was successful. | |
