Show simple item record

contributor authorZeng, Tao
contributor authorZhu, Guoming
date accessioned2019-03-17T10:58:49Z
date available2019-03-17T10:58:49Z
date copyright11/28/2018 12:00:00 AM
date issued2019
identifier issn0742-4795
identifier othergtp_141_05_051004.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256479
description abstractDiesel engines are of great challenges due to stringent emission and fuel economy requirements. Compared with the conventional turbocharger system, regenerative assisted system provides additional degrees-of-freedom for turbocharger speed control. Hence, it significantly improves control capability for exhaust-gas-recirculation (EGR) and boost pressure. This paper focuses on modeling and control of a diesel engine air-path system equipped with an EGR subsystem and a variable geometry turbocharger (VGT) coupled with a regenerative hydraulic-assisted turbocharger (RHAT). The challenges lie in the inherent coupling among EGR, turbocharger performance, and high nonlinearity of the engine air-path system. A control-oriented nonlinear RHAT system model is developed; and a linear quadratic (LQ) control design approach is proposed in this paper to regulate the EGR mass flow rate and boost pressure simultaneously and the resulting closed-loop system performance can be tuned by properly selecting the LQ control weighting matrices. Multiple LQ controllers with integral action are designed based on the linearized system models over a gridded engine operational map and the final gain-scheduling controller for a given engine operational condition is obtained by interpreting the neighboring LQ controllers. The gain-scheduling LQ controllers for both traditional VGT-EGR and VGT-EGR-RHAT systems are compared with the in-house baseline controller, consisting of two single-input and single-output (SISO) controllers, against the nonlinear plant. The simulation results show that the designed multi-input and multi-output LQ gain-scheduling controller is able to manage the performance trade-offs between EGR mass flow and boost pressure tracking. With the additional assisted and regenerative power available on the turbocharger shaft for the RHAT system, engine transient boost pressure performance can be significantly improved without compromising the EGR tracking performance, compared with the baseline control.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling and Control of a Diesel Engine With Regenerative Hydraulic-Assisted Turbocharger
typeJournal Paper
journal volume141
journal issue5
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4041932
journal fristpage51004
journal lastpage051004-12
treeJournal of Engineering for Gas Turbines and Power:;2019:;volume( 141 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record