Show simple item record

contributor authorTobias, Jonathan
contributor authorDepperschmidt, Daniel
contributor authorWelch, Cooper
contributor authorMiller, Robert
contributor authorUddi, Mruthunjaya
contributor authorAgrawal, Ajay K.
contributor authorDaniel, Jr., Ron
date accessioned2019-03-17T10:14:42Z
date available2019-03-17T10:14:42Z
date copyright10/4/2018 12:00:00 AM
date issued2019
identifier issn0742-4795
identifier othergtp_141_02_021021.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256021
description abstractPressure gain combustion (PGC) has been conceived to convert fuel's chemical energy into thermal energy and mechanical energy, thereby reducing the entropy production in the process. Recent research has shown that the rotating detonation combustor (RDC) can provide excellent specific thrust, specific impulse, and pressure gain within a small volume through rapid energy release by continuous detonation in the circumferential direction. The RDC as a PGC system for power generating gas turbines in combined cycle power plants could provide significant efficiency gains. However, few past studies have employed fuels that are relevant to power generation turbines, since RDC research has focused mainly on propulsion applications. In this study, we present experimental results from RDC operated on methane and oxygen-enriched air to represent reactants used in land-based power generation. The RDC is operated at a high pressure by placing a back-pressure plate downstream of the annular combustor. Past studies have focused mainly on probe measurements inside the combustor, and thus, little information is known about the nature of the products exiting the RDC. In particular, it is unknown if chemical reactions persist outside the RDC annulus, especially if methane is used as the fuel. In this study, we apply two time-resolved optical techniques to simultaneously image the RDC products at framing rate of 30 kHz: (1) direct visual-imaging to identify the overall size and extent of the plume, and (2) OH* chemiluminescence imaging to detect the reaction zones if any. Results show dynamic features of the combustion products that are consistent with the probe measurements inside the rotating detonation engine (RDE). Moreover, presence of OH* in the products suggests that the oblique shock wave and reactions persist downstream of the detonation zone in the RDC.
publisherThe American Society of Mechanical Engineers (ASME)
titleOH* Chemiluminescence Imaging of the Combustion Products From a Methane-Fueled Rotating Detonation Engine
typeJournal Paper
journal volume141
journal issue2
journal titleJournal of Engineering for Gas Turbines and Power
identifier doi10.1115/1.4041143
journal fristpage21021
journal lastpage021021-11
treeJournal of Engineering for Gas Turbines and Power:;2019:;volume( 141 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record