Journal of Engineering and Science in Medical Diagnostics and Therapy: Recent submissions
Now showing items 81-100 of 279
-
A Two-Dimensional Transient Computational Multi-Physics Model for Analyzing Magnetic and Non-Magnetic Particle (Red Blood Cells and E. Coli Bacteria) Dynamics in a Traveling Wave Ferro-Magnetic Microfluidic Device for Potential Cell Separation and Sorting
(The American Society of Mechanical Engineers (ASME), 2023)This paper presents the theory and development, validation, and results of a transient computational multiphysics model for analyzing the magnetic field, particle dynamics, and capture efficiency of magnetic and nonmagnetic ... -
Cervical Column and Cord and Column Responses in Whiplash With Stenosis: A Finite Element Modeling Study
(The American Society of Mechanical Engineers (ASME), 2023)Spine degeneration is a normal aging process. It may lead to stenotic spines that may have implications for pain and quality of life. The diagnosis is based on clinical symptomatology and imaging. Magnetic resonance images ... -
Verification Process for Finite Element Modeling Techniques Used in Biological Hard Tissue
(The American Society of Mechanical Engineers (ASME), 2023)An approach is presented for calculation verification of geometry-based and voxel-based finite element modeling techniques used for biological hard tissue. The purpose of this study is to offer a controlled comparison of ... -
Reviewer's Recognition
(The American Society of Mechanical Engineers (ASME), 2024)The Reviewers of the Year Award is given to reviewers who have made an outstanding contribution to the journal in terms of the quantity, quality, and turnaround time of reviews completed during the past 12 months. The prize ... -
An Affordable Telerobotic System Architecture for Grasp Training and Object Grasping for Human–Machine Interaction
(The American Society of Mechanical Engineers (ASME), 2023)Due to mobility impairment, a person might rely on wheelchairs, canes, and crutches for assistance but could face challenges when performing tasks such as grasping and manipulating objects due to limitations in reach and ... -
Variations of Middle Cerebral Artery Hemodynamics Due to Aneurysm Clipping Surgery
(The American Society of Mechanical Engineers (ASME), 2023)Cerebral aneurysms are potentially life-threatening cerebrovascular conditions where a weakened blood vessel in the brain bulges or protrudes over time. The most common way to treat aneurysms is surgical clipping, an ... -
Exploring the Impact of Sensor Location on Seismocardiography-Derived Cardiac Time Intervals
(The American Society of Mechanical Engineers (ASME), 2023)Cardiac time intervals (CTIs) are important parameters for evaluating cardiac function and can be measured noninvasively through electrocardiography (ECG) and seismocardiography (SCG). SCG signals exhibit distinct ... -
A Model to Predict Deflection of an Active Tendon-Driven Notched Needle Inside Soft Tissue
(The American Society of Mechanical Engineers (ASME), 2023)The last decade has witnessed major progress in the field of minimally invasive and robotic-assisted surgeries. Needle insertion, a minimally invasive technique, has proven its efficacy in procedures such as brachytherapy, ... -
Is It Feasible to Reconstruct Aortic Pressure Waveform Based on a One-Dimensional Uniform Model of the Arterial Tree?
(The American Society of Mechanical Engineers (ASME), 7/21/2023 )Based on a one-dimensional (1D) uniform model of the arterial tree, various machine-learning techniques have been explored to reconstruct aortic pressure waveform (APW) from peripheral pressure waveform (PPW). This study ... -
Tissue Growth Model for Maintaining Tensional Homeostasis With Applications to Hypertension and Stented Artery
(The American Society of Mechanical Engineers (ASME), 5/15/2023 )In this work, a theoretical growth model for maintaining a homeostatic mechanical environment was developed to capture the growth behavior of the artery and its association with its mechanical environment. The multiplicative ... -
Design and Implementation of a Behavioral Sequence Framework for Human–Robot Interaction Utilizing Brain-Computer Interface and Haptic Feedback
(The American Society of Mechanical Engineers (ASME), 5/15/2023 )In assistive robotics, research in Brain Computer Interface aims to understand human intent to enhance Human–Robot interaction and augment human performance. In this research, a framework to enable a person with an upper ... -
Quantifying Stent Wall Shear Stress for Assessing Stent and Flow Diverter Performance for Treating Intracranial Aneurysms
(The American Society of Mechanical Engineers (ASME), 3/30/2023 )Analysis of flow diverting intracranial aneurysm repair devices has traditionally focused on reducing intrasaccular blood flow velocity and aneurysm wall shear stress (WSS) as the primary metrics for improved perceived ... -
A Vibrating-String Model for Closed-Loop Wave Transmission and Reflection Between the Aorta and Periphery
(The American Society of Mechanical Engineers (ASME), 3/24/2023 )A tube-load model is used to reconstruct aortic pressure waveform from peripheral pressure waveform. Yet, the reconstructed aortic pressure waveform is greatly affected by load impedance used. In this work, a vibrating-string ... -
A Computational Study Evaluating the Effects of Diffuser Length and Pullback Distance on the Ablation Zone During Laser Ablation Treatment of Liver Cancer
(The American Society of Mechanical Engineers (ASME), 4/21/2023 )Although laser ablation is not commonly used for liver cancer treatment, there are several benefits that make it an appealing alternative. Nevertheless, investigations on the efficacy of laser ablation for liver cancer ... -
Determination of Optimum Design Parameters for Gyroid Scaffolds to Mimic a Real Bone-Like Condition In Vitro: A Fluid Structure Interaction Study
(The American Society of Mechanical Engineers (ASME), 6/7/2023 1)A suitable scaffold architecture is always desirable to get a biomimetic scaffold for bone tissue engineering. In this regard, a fluid structure interaction analysis was carried out on different Micro-CTs (μCTs) and gyroids ... -
Design and Development of Patient-Specific Miniplate for the Treatment of Maxillofacial Fractures—A Finite Element Study
(The American Society of Mechanical Engineers (ASME), 6/7/2023 1)Fractures of the maxillofacial region are prevalent in both developed and developing nations. Maxillofacial fractures primarily occur as a result of incidents such as car crashes, physical assaults, and attacks. Although ... -
Evaluating the In Vitro Mechanical Responses of Stem Cell Under Fluid Perfusion in Different Porous Scaffolds
(The American Society of Mechanical Engineers (ASME), 5/18/2023 )A suitable scaffold architecture is always desirable to get a favorable tissue response for bone tissue engineering. In this regard, a fluid–structure interaction (FSI) analysis was carried out on different porous scaffolds ... -
Biomechanical Analysis of Mandibular Bone-Implant Construct With Three Implant Screw Design: A Finite Element Study
(The American Society of Mechanical Engineers (ASME), 5/18/2023 )Temporomandibular joint replacement (TMJR) is a surgical procedure that relies heavily on the biomechanical properties of the implant-bone interface for success. In this study, we investigated the effects of three commonly ... -
Finite Element Analysis of Maxillary Anterior Dentition During Retraction With Varying Level of Bone Support
(The American Society of Mechanical Engineers (ASME), 4/5/2023 1)This study is being carried out to evaluate and compare the stress along the root surfaces of anterior maxillary dentition during retraction in labial and lingual mechanics with varying level of bone support. Eight ... -
Investigation of Mechanical Behaviors of Dental Implants With Different Geometries
(The American Society of Mechanical Engineers (ASME), 3/13/2023 )Dental implants have received a lot of attention and have been used to treat symptoms such as missing teeth and bad teeth. Due to the wide range of occupations and ages of patients, the functions and aims of implants are ...