A Potential Tool for the Study of Venous Ulcers: Blood Flow Responses to LoadSource: Journal of Biomechanical Engineering:;2018:;volume( 140 ):;issue: 003::page 31009DOI: 10.1115/1.4038742Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Venous ulcers are deep wounds that are located predominantly on the lower leg. They are prone to infection and once healed have a high probability of recurrence. Currently, there are no effective measures to predict and prevent venous ulcers from formation. Hence, the goal of this work was to develop a Windkessel-based model that can be used to identify hemodynamic parameters that change between healthy individuals and those with wounds. Once identified, these parameters have the potential to be used as indicators of when internal conditions change, putting the patient at higher risk for wound formation. In order to achieve this goal, blood flow responses in lower legs were measured experimentally by a laser Doppler perfusion monitor (LDPM) and simulated with a modeling approach. A circuit model was developed on the basis of the Windkessel theory. The hemodynamic parameters were extracted for three groups: legs with ulcers (“wounded”), legs without ulcers but from ulcer patients (“nonwounded”), and legs without vascular disease (“healthy”). The model was executed by two independent operators, and both operators reported significant differences between wounded and healthy legs in localized vascular resistance and compliance. The model successfully replicated the experimental blood flow profile. The global and local vascular resistances and compliance parameters rendered quantifiable differences between a population with venous ulcers and healthy individuals. This work supports that the Windkessel modeling approach has the potential to determine patient specific parameters that can be used to identify when conditions change making venous ulcer formation more likely.
|
Collections
Show full item record
contributor author | Pan, Wu | |
contributor author | Drost, Joshua P. | |
contributor author | Roccabianca, Sara | |
contributor author | Baek, Seungik | |
contributor author | Bush, Tamara Reid | |
date accessioned | 2019-02-28T11:11:11Z | |
date available | 2019-02-28T11:11:11Z | |
date copyright | 1/18/2018 12:00:00 AM | |
date issued | 2018 | |
identifier issn | 0148-0731 | |
identifier other | bio_140_03_031009.pdf | |
identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4253592 | |
description abstract | Venous ulcers are deep wounds that are located predominantly on the lower leg. They are prone to infection and once healed have a high probability of recurrence. Currently, there are no effective measures to predict and prevent venous ulcers from formation. Hence, the goal of this work was to develop a Windkessel-based model that can be used to identify hemodynamic parameters that change between healthy individuals and those with wounds. Once identified, these parameters have the potential to be used as indicators of when internal conditions change, putting the patient at higher risk for wound formation. In order to achieve this goal, blood flow responses in lower legs were measured experimentally by a laser Doppler perfusion monitor (LDPM) and simulated with a modeling approach. A circuit model was developed on the basis of the Windkessel theory. The hemodynamic parameters were extracted for three groups: legs with ulcers (“wounded”), legs without ulcers but from ulcer patients (“nonwounded”), and legs without vascular disease (“healthy”). The model was executed by two independent operators, and both operators reported significant differences between wounded and healthy legs in localized vascular resistance and compliance. The model successfully replicated the experimental blood flow profile. The global and local vascular resistances and compliance parameters rendered quantifiable differences between a population with venous ulcers and healthy individuals. This work supports that the Windkessel modeling approach has the potential to determine patient specific parameters that can be used to identify when conditions change making venous ulcer formation more likely. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | A Potential Tool for the Study of Venous Ulcers: Blood Flow Responses to Load | |
type | Journal Paper | |
journal volume | 140 | |
journal issue | 3 | |
journal title | Journal of Biomechanical Engineering | |
identifier doi | 10.1115/1.4038742 | |
journal fristpage | 31009 | |
journal lastpage | 031009-7 | |
tree | Journal of Biomechanical Engineering:;2018:;volume( 140 ):;issue: 003 | |
contenttype | Fulltext |