| contributor author | Lei, Zhefeng | |
| contributor author | Zhu, Xiaodong | |
| contributor author | Li, Yanhuai | |
| contributor author | Song, Zhongxiao | |
| contributor author | Liu, Haiping | |
| contributor author | Fu, Yong Qing | |
| date accessioned | 2019-02-28T11:08:42Z | |
| date available | 2019-02-28T11:08:42Z | |
| date copyright | 4/30/2018 12:00:00 AM | |
| date issued | 2018 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_140_05_051301.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4253155 | |
| description abstract | Effects of partial pressure of methane on deposition rate, hardness, bonding strength and friction coefficient of TiAlN/TiAlC0.37N0.63 multilayer coating were investigated. The TiAlN coating was deposited at a N2 flow rate of 70 sccm, and TiAlC0.37N0.63 coating were deposited at a N2 flow rate of 35 sccm and a CH4 flow rate of 35 sccm. TiAlN/TiAlC0.37N0.63 multilayer coatings with different modulation periods but the same total thickness of 3.56 μm were deposited on high speed steel (HSS) substrates using multi-arc ion plating technology. Microhardness and tribological measurement show that the multilayer coating with a modulating ratio of 1:1 and a modulation period of 68 nm had a hardness of 2793.9 HV0.10, an excellent bonding strength of 52 N, and the minimum friction coefficient of 0.46 and a relatively low wear rate. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Characterization and Tribological Behavior of TiAlN/TiAlCN Multilayer Coatings | |
| type | Journal Paper | |
| journal volume | 140 | |
| journal issue | 5 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4039723 | |
| journal fristpage | 51301 | |
| journal lastpage | 051301-5 | |
| tree | Journal of Tribology:;2018:;volume( 140 ):;issue: 005 | |
| contenttype | Fulltext | |