| contributor author | Hao, Xiuqing | |
| contributor author | Li, Hanlong | |
| contributor author | Song, Xiaolu | |
| contributor author | Li, Liang | |
| contributor author | He, Ning | |
| date accessioned | 2019-02-28T11:05:07Z | |
| date available | 2019-02-28T11:05:07Z | |
| date copyright | 12/26/2017 12:00:00 AM | |
| date issued | 2018 | |
| identifier issn | 2166-0468 | |
| identifier other | jmnm_006_02_021001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4252506 | |
| description abstract | The micro/nanotextured cemented carbide surface of different wettability was produced by laser scanning and fluorinated treatment. The tribological properties of the untextured, oleophobic and oleophilic micro/nanotextured surface were investigated experimentally including the effects of crank speed and contact pressure by a reciprocating friction and a wear tester. For all tested surfaces, the friction coefficient of the surface decreased as both the increasing crank speed and contact pressure increased. Compared to the untextured surface, the friction coefficient of the micro/nanotextured surface was significantly decreased, being sensitive to the wettability of the surface. Besides, the tribological properties of the oleophobic micro/nanotextured surface were superior to the oleophilic micro/nanotextured surface under the same experimental conditions. The improvement in tribological properties of the oleophobic micro/nanotextured surface could be attributed to the low wettability, which was beneficial to rapid accumulation of the lubricating oil on the surface. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Tribological Properties of Textured Cemented Carbide Surfaces of Different Wettability Produced by Pulse Laser | |
| type | Journal Paper | |
| journal volume | 6 | |
| journal issue | 2 | |
| journal title | Journal of Micro and Nano-Manufacturing | |
| identifier doi | 10.1115/1.4038629 | |
| journal fristpage | 21001 | |
| journal lastpage | 021001-9 | |
| tree | Journal of Micro and Nano-Manufacturing:;2018:;volume( 006 ):;issue: 002 | |
| contenttype | Fulltext | |
