Show simple item record

contributor authorTamura, Atsutaka
contributor authorHasegawa, Junji
contributor authorKoide, Takao
date accessioned2019-02-28T11:04:38Z
date available2019-02-28T11:04:38Z
date copyright4/30/2018 12:00:00 AM
date issued2018
identifier issn2332-9017
identifier otherrisk_004_04_041004.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4252420
description abstractA series of pedestrian sideswipe impacts were computationally reconstructed; a fast-walking pedestrian was collided laterally with the side of a moving vehicle at 25 km/h or 40 km/h, which resulted in rotating the pedestrian's body axially. Potential severity of traumatic brain injury (TBI) was assessed using linear and rotational acceleration pulses applied to the head and by measuring intracranial brain tissue deformation. We found that TBI risk due to secondary head strike with the ground can be much greater than that due to primary head strike with the vehicle. Further, an “effective” head mass, meff, was computed based upon the impulse and vertical velocity change involved in the secondary head strike, which mostly exceeded the mass of the adult head-form impactor (4.5 kg) commonly used for a current regulatory impact test for pedestrian safety assessment. Our results demonstrated that a sport utility vehicle (SUV) is more aggressive than a sedan due to the differences in frontal shape. Additionally, it was highlighted that a striking vehicle velocity should be lower than 25 km/h at the moment of impact to exclude the potential risk of sustaining TBI, which would be mitigated by actively controlling meff, because meff is closely associated with a rotational acceleration pulse applied to the head involved in the final event of ground contact.
publisherThe American Society of Mechanical Engineers (ASME)
titleComparative Analysis on Traumatic Brain Injury Risk Due to Primary and Secondary Impacts in a Pedestrian Sideswipe Accident
typeJournal Paper
journal volume4
journal issue4
journal titleASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering
identifier doi10.1115/1.4039464
journal fristpage41004
journal lastpage041004-7
treeASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering:;2018:;volume( 004 ):;issue:004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record