Laser Forming of Sandwich Panels With Metal Foam Cores

Abstract

Over the past decade, laser forming has been effectively used to bend various metal foams, opening the possibility of applying these unique materials in new engineering applications. The purpose of the study was to extend laser forming to bend sandwich panels consisting of metallic facesheets joined to a metal foam core. Metal foam sandwich panels combine the excellent shock-absorption properties and low weight of metal foam with the wear resistance and strength of metallic facesheets, making them desirable for many applications in fields such as aerospace, the automotive industry, and solar power plants. To better understand the bending behavior of metal foam sandwich panels, as well as the impact of laser forming on the material properties, the fundamental mechanisms that govern bending deformation during laser forming were analyzed. It was found that the well-established bending mechanisms that separately govern solid metal and metal foam laser forming still apply to sandwich panel laser forming. However, two mechanisms operate in tandem, and a separate mechanism is responsible for the deformation of the solid facesheet and the foam core. From the bending mechanism analysis, it was concluded on the maximum achievable bending angle and the overall efficiency of the laser forming process at different process conditions. Throughout the analysis, experimental results were complemented by numerical simulations that were obtained using two finite element models that followed different geometrical approaches.