Flow Field and Wall Temperature Measurements for Reacting Flow in a Lean Premixed Swirl Stabilized Can Combustor

Abstract

In this study, we provide detailed wall heat flux measurements and flow details for reacting flow conditions in a model combustor. Heat transfer measurements inside a gas turbine combustor provide one of the most serious challenges for gas turbine researchers. Gas turbine combustor improvements require accurate measurement and prediction of reacting flows. Flow and heat transfer measurements inside combustors under reacting flow conditions remain a challenge. The mechanisms of thermal energy transfer must be investigated by studying the flow characteristics and associated heat load. This paper experimentally investigates the effects of combustor operating conditions on the reacting flow in an optical single can combustor. The swirling flow was generated by an industrial lean premixed, axial swirl fuel nozzle. Planar particle image velocimetry (PIV) data were analyzed to understand the characteristics of the flow field. Liner surface temperatures were measured in reacting condition with an infrared camera for a single case. Experiments were conducted at Reynolds numbers ranging between 50,000 and 110,000 (with respect to the nozzle diameter, DN); equivalence ratios between 0.55 and 0.78; and pilot fuel split ratios of 0 to 6%. Characterizing the impingement location on the liner, and the turbulent kinetic energy (TKE) distribution were a fundamental part of the investigation. Self-similar characteristics were observed at different reacting conditions. Swirling exit flow from the nozzle was found to be unaffected by the operating conditions with little effect on the liner. Comparison between reacting and nonreacting flows (NR) yielded very interesting and striking differences.