Adaptability Research of Thermal–Chemical Assisted Steam Injection in Heavy Oil Reservoirs

Abstract

Thermal–chemical flooding (TCF) is an effective alternative to enhance heavy oil recovery after steam injection. In this paper, single and parallel sand-pack flooding experiments were carried out to investigate the oil displacement ability of thermal–chemical composed of steam, nitrogen (N2), and viscosity breaker (VB), considering multiple factors such as residual oil saturation (Sorw) postwater flood, scheme switch time, and permeability contrast. The results of single sand-pack experiments indicated that compared with steam flooding (SF), steam-nitrogen flooding, and steam-VB flooding, TCF had the best displacement efficiency, which was 11.7% higher than that of pure SF. The more serious of water-flooded degree, the poorer of TCF effect. The improvement effect of TCF almost lost as water saturation reached 80%. Moreover, the earlier TCF was transferred from steam injection, the higher oil recovery was obtained. The parallel sand-pack experiments suggested that TCF had good adaptability to reservoir heterogeneity. Emulsions generated after thermal–chemical injection diverted the following compound fluid turning to the low-permeable tube (LPT) due to its capturing and blocking ability. The expansion of N2 and the disturbance of VB promoted oil recovery in both tubes. As reservoir heterogeneity became more serious, namely, permeability contrast was more than 6 in this study, the improvement effect became weaker due to earlier steam channeling in the high-permeable tube (HPT).