Effect of Uneven Wall Heating Conditions Under Different Buoyancy Numbers for a One Side Rib-Roughened Rotating ChannelSource: Journal of Turbomachinery:;2017:;volume( 139 ):;issue: 011::page 111011DOI: 10.1115/1.4037758Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper investigates the impacts of uneven wall heating conditions under different buoyancy numbers on flow field and heat transfer performance of a rotating channel with one side smooth and one side roughened by 45 deg inclined ribs. Parametric Reynolds-averaged Navier–Stokes (RANS) simulations were conducted under two different wall heating conditions: only ribbed wall heated, as in experiment setup, and all walls heated, under three different buoyancy numbers. Results are compared, when available, with experimental results. Numerical results show that uneven wall heating has only a minor impact on nonrotating cases and very low buoyancy rotating cases. However, it has a significant influence, on both, the heat transfer behavior and the flow field, when the buoyancy number is large. In the ribbed trailing rotating tests, the all walls heated cases show significantly higher heat transfer rate than only the ribbed wall heated cases. The discrepancy is enlarged as buoyancy number increases. The heat transfer in the all walls heated case increases monotonically with the buoyancy number, whereas in the ribbed wall, heated case is slight reduced. In the ribbed leading rotating tests, the heat transfer sensitivity to the heating conditions is not conspicuous, and for both cases, the heat transfer level slightly reduced as the buoyancy number increased. The flow field investigation shows that there is a significant displacement of main flow in the all walls heated cases than only the ribbed wall heated cases under high buoyancy numbers. This displacement is due to the buoyancy effect and responsible for the heat transfer differences in uneven heating problems. According to the results obtained in the paper, we conclude that when buoyancy effects are relevant, the heating settings can play a significant role in the heat transfer mechanisms and therefore in the experimental and numerical results.
|
Collections
Show full item record
contributor author | Wang | |
contributor author | Zhi;Corral | |
contributor author | Roque | |
date accessioned | 2017-12-30T11:43:47Z | |
date available | 2017-12-30T11:43:47Z | |
date copyright | 9/19/2017 12:00:00 AM | |
date issued | 2017 | |
identifier issn | 0889-504X | |
identifier other | turbo_139_11_111011.pdf | |
identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4242903 | |
description abstract | This paper investigates the impacts of uneven wall heating conditions under different buoyancy numbers on flow field and heat transfer performance of a rotating channel with one side smooth and one side roughened by 45 deg inclined ribs. Parametric Reynolds-averaged Navier–Stokes (RANS) simulations were conducted under two different wall heating conditions: only ribbed wall heated, as in experiment setup, and all walls heated, under three different buoyancy numbers. Results are compared, when available, with experimental results. Numerical results show that uneven wall heating has only a minor impact on nonrotating cases and very low buoyancy rotating cases. However, it has a significant influence, on both, the heat transfer behavior and the flow field, when the buoyancy number is large. In the ribbed trailing rotating tests, the all walls heated cases show significantly higher heat transfer rate than only the ribbed wall heated cases. The discrepancy is enlarged as buoyancy number increases. The heat transfer in the all walls heated case increases monotonically with the buoyancy number, whereas in the ribbed wall, heated case is slight reduced. In the ribbed leading rotating tests, the heat transfer sensitivity to the heating conditions is not conspicuous, and for both cases, the heat transfer level slightly reduced as the buoyancy number increased. The flow field investigation shows that there is a significant displacement of main flow in the all walls heated cases than only the ribbed wall heated cases under high buoyancy numbers. This displacement is due to the buoyancy effect and responsible for the heat transfer differences in uneven heating problems. According to the results obtained in the paper, we conclude that when buoyancy effects are relevant, the heating settings can play a significant role in the heat transfer mechanisms and therefore in the experimental and numerical results. | |
publisher | The American Society of Mechanical Engineers (ASME) | |
title | Effect of Uneven Wall Heating Conditions Under Different Buoyancy Numbers for a One Side Rib-Roughened Rotating Channel | |
type | Journal Paper | |
journal volume | 139 | |
journal issue | 11 | |
journal title | Journal of Turbomachinery | |
identifier doi | 10.1115/1.4037758 | |
journal fristpage | 111011 | |
journal lastpage | 111011-10 | |
tree | Journal of Turbomachinery:;2017:;volume( 139 ):;issue: 011 | |
contenttype | Fulltext |